Acetylene reaction with sulfur

Derivation (1) Condensation of ethylene oxide with hydrocyanic acid followed by reaction with sulfuric acid at 320F (2) acetylene, carbon monoxide, and water, with nickel catalyst (3) propylene is vapor oxidized to acrolein, which is oxidized to acrylic acid at 300C with molybdenum-vanadium catalyst (4) hydrolysis of acrylonitrile. 

Acetylene can be deterrnined volumetricaHy by absorption in Aiming sulfuric acid (or more conveniently in sulfuric acid activated with silver sulfate) or by reaction with silver nitrate in solution and titration of the nitric acid formed ... 

Tsai et al. have also used RAIR to investigate reactions occurring between rubber compounds and plasma polymerized acetylene primers deposited onto steel substrates [12J. Because of the complexities involved in using actual rubber formulations, RAIR was used to examine primed steel substrates after reaction with a model rubber compound consisting of squalene (100 parts per hundred or phr), zinc oxide (10 phr), carbon black (10 phr), sulfur (5 phr), stearic acid (2 phr). 

The chemistry of 1,2,5-thiadiazole systems (RC)2N2S has been extensively investigated. " In addition to the condensation reactions of sulfur halides with 1,2-diaminobenzenes, this ring system is obtained in high yields by the reaction of S4N4 with acetylenes (Section 5.2.6). For example, the reaction of S4N4 with diphenylacetylene produces 3,4-diphenyl-1,2,5-thiadiazole in 87% yield. 

In about 250 cc of liquid ammonia (cooled with dry ice and acetone) are dissolved about 7.5 g of potassium and into the solution acetylene is passed until the blue color has disappeared (about 3 hours). Then slowly a solution or suspension of 3 g of estrone in 150 cc of benzene and 50 cc of ether is added. The freezing mixture is removed, the whole allowed to stand for about 2 hours and the solution further stirred overnight. Thereupon the reaction solution is treated with ice and water, acidified with sulfuric acid to an acid reaction to Congo red and the solution extracted five times with ether. The combined ether extracts are washed twice with water, once with 5% sodium carbonate solution and again with water until the washing water is neutral. Then the ether is evaporated, the residue dissolved in a little methanol and diluted with water. The separated product is recrystallized from aqueous methanol. The yield amounts to 2.77 g. The 17-ethiny I-estradiol-3,17 thus obtained melts at 142°C to 144°C . 

Sulfonium, cyclopropyldiphenyl tetrafluoroborate, 54, 28 Sulfonium salts, acetylenic, furans from, 53, 3 Sulfonium ylides, 54, 32 Sulfur, reaction with organo-lithium compounds, 50, 105 Sulfuryl chloride, with 1,1-cyclobutanedicarboxylic acid to give 3-chloro-l,1-cyclobutanedicarboxylic acid, 51, 73... 

Later authors established the approximate composition of products formed in the reaction of acetylene with sulfur at different temperatures. At 325° the composition was found to be CSj 77%, thiophene 9%, thienothiophene 1 6% at 500°, CSj 77%, thiophene 12%, and thienothiophene 1 6% at 650° CS2 83%, thiophene 5%, and thienothiophene 1 3%, with sulfur conversion being 38%, 74%, and 77%, respectively. When studying this reaction at 290°-390°, Bhatt et isolated thiophenol in addition to the above compounds but failed to increase the yield of thienothiophene 1. 

The formation of thieno[3,2-6]thiophene (2) together with thieno[2,3-6]-thiophene (1) in reactions of citric acid with PjSj or of acetylene with sulfur was first suggested by Anschutz and Blhc us. ... 

Biedermann and Jacobson, who first prepared thieno[2,3-6]-thiophene (1) in 1886, characterized it as a 2,3,4,5-tetrabromo derivative with m.p. 172°. Later Capelle reported the isolation of a dibromo derivative of thienothiophene 1 with m.p. 122.5°, which was shown by Challenger and Harrison to be 2,3,5-tribromothieno[2,3-6]thiophene (m.p. 123°-124°). Capelle also obtained a tetrabromide, m.p. 223°, by bromination of the product of reaction of acetylene with sulfur. The tetrabromide seems to be identical with that prepared from the product of reaction of methane, acetylene, and hydrogen sulfide, m.p. 229°-230°, and is evidently 2,3,5,6-tetrabromothieno[3,2-6j-thiophene. ... 

Rearrangements arc common in reactions of sulfur tetrafluoride with acetylenic and allylic alcohols. Highly acidic acetylenic alcohols derived from hexafluoroacetone and other haloacetones react readily at ambient temperature to give fluorinated allenes 10 as the sole... 

---