Vyrene

One partieular form of thermoplastic polyurethane elastomers is the elastic fibre known as spandex fibre. Like the usual thermoplastic rubbers these materials consist of hard and soft segments but to qualify for the term spandex by the US Federal Trade Commission the polymer used should contain at least 85% of segmented polyurethane. The first commercial material of this type was introduced by Du Pont in 1958 (Lycra). Several other similar materials have since been introduced including Dorlastan (Bayer), Spanzelle (Courtaulds) and Vyrene (US Rubber). 

Both polyethers and polyesters may be used as polyols. For example, Du Pont use polytetrahydrofuran for Lycra whilst US Rubber originally used a polyester of molecular mass of about 2000 obtained by condensing adipic acid with a mixture of ethylene and propylene glycols. A polyether-based mixture was used for Vyrene 2 introduced in 1967. All the polyols have terminal hydroxyl groups. 

The generic name given, in the USA, to stretch fibres based on elastomeric long-chain polyester polyurethanes. Trade names are, e.g., Lycra and Vyrene . 

One particular form of thermoplastic polyurethane elastomer is the elastic fiber known as Spandex. Several commercial materials of this type have been introduced, which include Lycra (Du Pont), Dorlastan (Bayer) Spanzelle (Courtaulds), and Vyrene (U.S. Rubber). Spandex fibers have higher modulus, tensile strength, and resistance to oxidation, and are able to produce finer deniers than natural rubber. They have enabled lighter-weight garments to be produced. Staple fiber blends of Spandex fiber with non-elastic fibers have also been introduced. 

Subsequently several other similar materials have been introduced, including Dorlastan (Bayer), Spanzelle (Courtaulds), and Vyrene (U.S. Rubber). 

---