Ethers, vinyl synthesis

Makioka Y, Shindo T, Taniguchi Y, Takaki K, Fujiwara Y (1995) Ytterbium(III) triflate catalyzed synthesis of quinolinic derivatives from V-arylaldimincs and vinyl ethers. Synthesis 801-804... 

Hojo, M. Masuda, R. Okada, D. A facile synthesis of 2,4-dialkoxy-, 2-alkoxy-4-phenoxy-and 2,4-diphenoxy-6-trifluoromethyl-3,4-dihydro-2/7-pyrans. Hetero-Diels-Alder reactions of tra i- 3-trifluoroacetylvinyl ethers with various vinyl ethers. Synthesis 1989, 215-216. 

In early work, vinyl chloride had been heated with stoichiometric amounts of alkaU alkoxides in excess alcohol as solvent, giving vinyl ethers as products (210). Supposedly this involved a Williamson ether synthesis, where alkaU alkoxide and organic haUde gave an ether and alkaU haUde. However, it was observed that small amounts of acetylene were formed by dehydrohalogenation of vinyl chloride, and that this acetylene was consumed as the reaction proceeded. Hence acetylene was substituted for vinyl chloride and only catalytic amounts of alkaU were used. Vinylation proceeded readily with high yields (211). 

Acrolein as Diene. An industrially useful reaction in which acrolein participates as the diene is that with methyl vinyl ether. The product, methoxydihydropyran, is an intermediate in the synthesis of glutaraldehyde [111 -30-8]. 

Another synthesis of the cortisol side chain from a C17-keto-steroid is shown in Figure 20. Treatment of a C3-protected steroid 3,3-ethanedyidimercapto-androst-4-ene-ll,17-dione [112743-82-5] (144) with a tnhaloacetate, 2inc, and a Lewis acid produces (145). Addition of a phenol and potassium carbonate to (145) in refluxing butanone yields the aryl vinyl ether (146). Concomitant reduction of the C20-ester and the Cll-ketone of (146) with lithium aluminum hydride forms (147). Deprotection of the C3-thioketal, followed by treatment of (148) with y /(7-chlotopetben2oic acid, produces epoxide (149). Hydrolysis of (149) under acidic conditions yields cortisol (29) (181). 

Alternatively, thermal cracking of acetals or metal-catalyzed transvinylation can be employed. Vinyl acetate or MVE can be employed for transvinylation and several references illustrate the preparation especially of higher vinyl ethers by such laboratory techniques. Special catalysts and conditions are required for the synthesis of the phenol vinyl ethers to avoid resinous condensation products (6,7). Direct reaction of ethylene with alcohols has also been investigated (8). 

Beeause of its high ehemieal reaetivity, aeetylene has found wide use in synthesis of vinyl ehloride, vinyl aeetate, aerylonitrile, vinyl ethers, vinyl aeetylene, triehloro- and tetraehloro-ethylene ete., in oxyaeetylene eutting and welding, and as a fuel for atomie absorption instruments. 

In the synthesis of carpamic acid (98), Mitsutaka and Ogawa have used 1,2-dihydropyridine as a starting material [80H(14)169]. Photooxygenation of dihydropyridine 8h afforded enr/o-peroxide 96. Subsequent stereoselective nucleophilic reaction of 96 with ethyl vinyl ether in the presence of tin chloride gave tetrahydropyridinol 97, which was then converted into carpamic acid (98) in six more steps. 

Stereocontrolled synthesis of oxabicyclic (3-lactam antibiotics via [2- -2] cycloaddition of isocyanates to sugar vinyl ethers 96CC2689. 

Legros et al. (2001T2507) carried out the synthesis of acetylquinolines (e.g. 130) via Heck reaction of 3-bromoquinoline (70) and -butyl vinyl ether (Scheme 16) employing either Pd(dba)2 or Pd(OAc)a as the catalyst. In each case it was found that the Heck reaction for this synthesis gave better overall yields than using the Stille reaction (see Section IV.C). Another advantageous point in favor of the Heck is that it avoids the use of toxic stannane. 

A long-standing goal in polyolefins is the synthesis of polymers bearing polar functional groups such as acrylate, esters, or vinyl ethers, etc [24,40]. These copolymers might endow polyolefins with useful properties such as adhesiveness, dyeability, paintability, and print-ibility. Advances have recently been made in polymerizing polar monomers with cationic metallocene catalysts... 

The furanoid vinyl ethers described above are of interest in view of the structure of the nucleoside antibiotic angustmycin A (2) (15) which also contains an exocyclic double bond. As a first step towards the synthesis of analogs of angustmycin A (2), preparation of exocyclic vinyl ethers from hexulofuranoid derivatives was studied. Benzoylation of 2,3 4,6-di-0-isopropylidene-a-L-ryZo-hexulofuranose (44) followed by selective acid hydrolysis of the 4,6-O-isopropylidene group afforded l-0-benzoyl-2,3-0-isopropylidene-a-L-ryZohexulofuranose (45) in 72%... 

Two other important sigmatropic reactions are the Claisen rearrangement of an allyl aryl ether discussed in Section 18.4 and the Cope rearrangement of a 1,5-hexadiene. These two, along with the Diels-Alder reaction, are the most useful pericyclic reactions for organic synthesis many thousands of examples of all three are known. Note that the Claisen rearrangement occurs with both allylic aryl ethers and allylic vinylic ethers. 

---