Ultrafiltration technique, pollutant

Although the dry film thickness on the metal edges is somewhat lower, these areas are still efficiently protected against corrosion. The ultrafiltration technique results in a very high transfer effect and a uniform coating paint solids from the bath are deposited on the metal surface without loss. Since electrodeposition paints have a low organic solvent content, air pollution is low. The dip tank contents are not flammable, which reduces insurance costs [11.5]. 

Clearly, one option to reduce the add-on is to use high-efficiency size formulations. However, there is a limit to what can be achieved by this approach. Even if the add-on is reduced to only 5%, the pollution load is still substantial. The two main options to facilitate disposal are (a) recovery of size polymers and (b) biological effluent treatment. Recovery of size polymers, particularly from water-soluble synthetic sizes, is based on extraction washing using the minimum quantity of water. Recovery rates in the region of 50% have been quoted for polyfvinyl alcohol) and carboxymethylcellulose size formulations. It is necessary to apply one of three concentration techniques precipitation, condensation or ultrafiltration [205]. 

This technique of MEUF has also been successfully employed for the recovery of thuringiensin [258], removal of cresols [262], extraction of chromate anion [257], removal of dissolved organic pollutants [256], removal of -alcohols [263],preconcentration and removal of iron [260], and preconcentration of aniline derivatives [261].Kandori and Schechter [264] have given a detailed account of selecting surfactants for MEUF. The design characteristics of micellar enhanced utrafilters and cross-flow ultrafiltration of micellar surfactant solutions have been described by Markets et al. [265]. 

---