Tubular reactors dispersion coefficient determination

The model is referred to as a dispersion model, and the value of the dispersion coefficient De is determined empirically based on correlations or experimental data. In a case where Eq. (19-21) is converted to dimensionless variables, the coefficient of the second derivative is referred to as the Peclet number (Pe = uL/De), where L is the reactor length and u is the linear velocity. For plug flow, De = 0 (Pe ) while for a CSTR, De = oo (Pe = 0). To solve Eq. (19-21), one initial condition and two boundary conditions are needed. The closed-ends boundary conditions are uC0 = (uC — DedC/dL)L=o and (dC/BL)i = i = 0 (e.g., see Wen and Fan, Models for Flow Systems in Chemical Reactors, Marcel Dekker, 1975). Figure 19-2 shows the performance of a tubular reactor with dispersion compared to that of a plug flow reactor. 

Here we use a single parameter to account for the nonideality of our reactor. This parameter is most always evaluated by analyzing the RTD determined from a tracer test. Examples of one-parameter models for a nonideal CSTR include the reactor dead volume V, where no reaction takes place, or the fraction / of fluid bypassing the reactor, thereby exiting unreacted. Examples of one-parameter models for tubular reactors include the tanks-in-series model and the dispersion model. For the tanks-in-series model, the parameter is the number of tanks, n, and for the dispersion model, it is the dispersion coefficient D,. Knowing the parameter values, we then proceed to determine the conversion and/or effluent concentrations for the reactor. 

Flow, Reaction, and Dispersion Having discussed how to determine the dispersion coefficient we now return to the case where we have both dispersion and reaction in a tubular reactor. A mole balance is taken on a particular component of the mixture (say, species A) over a short length Ac of a tubular reactor in a maimer identical to that in Chapter I, to arrive at... 

Step 19. Determine the coefficient of the axial concentration gradient in the two coupled ODEs that must be solved to calculate the outlet conversion in a packed catalytic tubular reactor with convection, axial dispersion, and chemical reaction. 

---