Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Tubular Exchanger Manufacturers

Standards of Tubular Exchanger Manufacturers Mssociation, TEMA, Inc., New York, 1974. [Pg.500]

TEMA Numbering and Type Designation Recommended practice for the designation of TEMA-style shell-and-tube heat exchangers by numbers and letters has been established by the Tubular Exchanger Manufacturers Association (TEMA). This information from the sixth edition of the TEMA Standards is reproduced in the following paragraphs. [Pg.1063]

FIG. 11-35 TEMA-type designations for shell-and-tube beat exchangers. (Standards of Tubular Exchanger Manufacturers Association, 6tb ed., 1978.)... [Pg.1064]

FIG. 11 -36 (Continued) Heat-exchanger-component nomenclature, (c) Outside-packed floating-head exchanger. Type AEP. (d) U-tuhe heat exchanger. Type CFU. (e) Kettle-type floating-head rehoder. Type AKT. (Standard of Tubular Exchanger Manufacturers Association, 6th ed., 1978. )... [Pg.1067]

Standards of Tubular Exchanger Manufacturers Association (TEMA), 7th Edition. [Pg.24]

Standards of Tubular Exchanger Manufacturers Association (latest edition) Tubular Exchanger Manufacturers Association, Inc. (TEMA), 707 Westchester Ave., White Plains, New York 10604. [Pg.222]

The Tubular Exchanger Manufacturers Assn, has established heat exchanger standards and nomenclature. Every shell-and-tube device has a three-letter designation the letters refer to the specific type of stationary head at the front end, the shell type, and the rear-end head type, respectively (a fully illustrated description can be found in the TEMA standards). Common TEMA designations are listed with specific configurations described below. [Pg.27]

Standards of the Tubular Exchangers Manufacturers Association (TEMA Standards, latest edition)... [Pg.31]

Eigures 10-lA-G and Table 10-1 from the Standards of Tubular Exchanger Manufacturers Association give the nomenclature of the basic types of units. Note the nomenclature type designation code letters immediately below each illustration. These codes are assembled from Table 10-1 and Eigures 10-lA-G. [Pg.3]

Used by permission Standards of the Tubular Exchanger Manufacturers Association, 7 Ed., Table D-7, <... [Pg.22]

See other pages where Tubular Exchanger Manufacturers is mentioned: [Pg.494]    [Pg.76]    [Pg.1027]    [Pg.1038]    [Pg.1054]    [Pg.1065]    [Pg.180]    [Pg.184]    [Pg.232]    [Pg.24]    [Pg.24]    [Pg.26]    [Pg.48]    [Pg.487]    [Pg.1]   


SEARCH



© 2024 chempedia.info