Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Treatment treating tank design

The bottom water recovery system uses existing wells or new wells to create the water recovery system for removal of the water used to wash the contaminated soil. Reverse leaching or soil washing can be conducted by controlling the water levels within the tank. This design minimizes the volume of clean ex situ water entering the system for treatment. Extremely dense clays may be difficult to treat with this technology. [Pg.739]

DOT specification TC/MC-331 prescribes fabrication from steel under Section VIII of the AS ME Boiler and Pressure Vessel Code, and a minimum design pressure of 265 psig (1830 kPa) is required [14]. Steel of a thickness less than 3/16 inch (4.8 mm) must not be used for the shell, heads, or protective housings. Each cargo tank used for ammonia must be post-weld heat treated. The post-weld heat treatment must be performed as prescribed by the ASME Code. See 49 CFR 178.337-1, (f) [9]. [Pg.257]

See other pages where Treatment treating tank design is mentioned: [Pg.283]    [Pg.316]    [Pg.1550]    [Pg.359]    [Pg.597]    [Pg.910]    [Pg.896]    [Pg.745]    [Pg.901]    [Pg.61]    [Pg.20]    [Pg.179]    [Pg.198]    [Pg.316]    [Pg.159]    [Pg.364]    [Pg.278]    [Pg.293]    [Pg.1372]    [Pg.375]    [Pg.1856]    [Pg.23]    [Pg.456]    [Pg.1848]    [Pg.24]    [Pg.1554]    [Pg.440]    [Pg.368]    [Pg.217]    [Pg.98]    [Pg.247]    [Pg.925]    [Pg.263]    [Pg.1951]    [Pg.1952]    [Pg.2119]    [Pg.212]    [Pg.142]    [Pg.217]    [Pg.193]   
See also in sourсe #XX -- [ Pg.559 , Pg.1097 , Pg.1234 ]



SEARCH



Tank treatment

Tanks design

© 2024 chempedia.info