Transportable pressure receptacles

The Carriage of Dangerous Goods (Classification, Packaging and Labelling) and Use of Transportable Pressure Receptacles Regulations 1996... 

Part 3 Transportable pressure receptacles (high pressure gas cylinders) r.l2 Pressme receptacles must be ... 

Bursters from the mortars and projectiles are fed into the BWMs by a pick-and-place machine and processed in the BWMs to wash out aU explosives (Parsons, 2000c). There is one BWM in each ECR (total of two). The BWM has a rotary carousel with multiple receptacles. Bursters are aligned with a multinozzle water-jet washout probe on the BWM so that the jet cuts into the explosive charge axially from the open end. The water jet, which contains no abrasive, is injected at about 12,000 psi, although lower pressures of 2,000 to 3,000 psi are being considered. When the jet reaches the end of the burste tube, the water-jet probe is withdrawn. The washed burster tubes are discharged from the BWM one at a time onto a conveyor for transport to a container-loading station in the parts transfer area and then conveyed to the batch MPT for 5X decontamination. 

---