Transition aluminas, preparation catalytic materials

Transition Metal Salts and Oxides on Alumina. Transition metal salts, particularly chlorides and nitrates, are frequently used as starting materials for the preparation of supported transition metal oxides or supported precursors for supported metal catalysts. Also, many catalytic materials, particularly supported molybdenum and tungsten oxide and sulfide catalysts, contain transition metal ions, namely Co, Ni , and Fe " as promoters. Thus, it is interesting to study the spreading and wetting behavior of salts of these transition metals and of their oxides. This is of particular importance for promoted catalyst materials, since in practice the incorporation of the active phase and the promoter should be possible in one step for economic reasons. 

Among the supports that have been used in the preparation of supported transition metal nanoparticles are carbon, silica, alumina, titanium dioxide, and polymeric supports [57], and the most frequently used support is alumina [56], These supports normally produce an effect on the catalytic activity of the metallic nanoparticles supported on the amorphous material [60], In Chapter 3, different methods for the preparation of metallic catalysts supported on amorphous solids were described [61-71],... 

Transition metal carbides (mainly of W and Mo) have been shown to be effective catalysts in some chemical reactions that are usually catalyzed by noble metals such as Pt and Pd (ref.1). Their remarkable physical properties added to lower cost and better availability could make them good candidates for substitute materials to noble metals in automobile exhaust catalysis. Hence, for this purpose, we have prepared several catalysts of tungsten carbide and W,Mo mixed carbides supported on y alumina with different Mo/W atom ratios. The surface composition has been studied by XPS while the quantitative determination of catalytic sites has been obtained by selective chemisorption of hydrogen and of carbon monoxide. The catalytic performances of these catalysts have been evaluated in the simultaneous conversion of carbon monoxide, nitric oxide and propane from a synthetic exhaust gas. 

---