The process of annealing

Because of the observed relationship between time and temperature, fission track annealing data have traditionally been displayed on a variation of an Arrhenius plot (e.g., Haack 1972, Laslett et al. 1987) using Equation (5). 

---

In an atmosphere of carbon dioxide, filings from the reguli were screened through a 200-mesh sieve and collected in thin-walled glass capillaries about mm. in diameter. The capillaries were then evacuated and sealed, and the specimens were annealed at 280° C. for 40 hr. and allowed to cool at the rate of about 0-001 ° C./ sec. (It was observed that specimens which were not annealed gave diffuse diffraction lines the lines were made sharp by the process of annealing as described above.)... 

The use of the diamond in dividing plain surfaces of glass, datos from the sixteenth century but its application to the splitting of Cylinders which had not undergone the process of annealing, was introduced only about twenty years ngo by M. ClAudet, the distill-... 

In step 2, primers are added, which are complementary to the ends of the target sequence. They bind to the original strands when the solution is cooled, the process of annealing. 

First, let us consider the case of phase 1 growing within a narrow concentration range Ac = Cr — 1 at the process of annealing of a sample couple containing... 

Let us treat the initial stage of phase formation in the process of annealing of the diffusion couple A-B, regarding the phase diagram to indude two intermediate phases 1 (ci, Ci + Aci) and 2 (oi, + AC2), and neglecting the solubilities of A in B and B in A. The concentration profile can be depicted from Figure 2.2 (see the previous chapter). Then the equations of diffusion interaction between phases are of the following form ... 

---