The BET and Related Isotherms

Adsorption isotherms are by no means all of the Langmuir type as to shape, and Brunauer [34] considered that there are five principal forms, as illustrated in Fig. XVII-7. TVpe I is the Langmuir type, roughly characterized by a monotonic approach to a limiting adsorption at presumably corresponds to a complete monolayer. Type II is very common in the case of physical adsorption 

This description is traditional, and some further comment is in order. The flat region of the type I isotherm has never been observed up to pressures approaching this type typically is observed in chemisorption, at pressures far below P. Types II and III approach the line asymptotically experimentally, such behavior is observed for adsorption on powdered samples, and the approach toward infinite film thickness is actually due to interparticle condensation [36] (see Section X-6B), although such behavior is expected even for adsorption on a flat surface if bulk liquid adsorbate wets the adsorbent. Types FV and V specifically refer to porous solids. There is a need to recognize at least the two additional isotherm types shown in Fig. XVII-8. These are two simple types possible for adsorption on a flat surface for the case where bulk liquid adsorbate rests on the adsorbent with a finite contact angle [37, 38]. 

---