Take-Up Lever

Thread take-up lever. Moves up and down it s where the upper thread is guided through... 

Take-up lever Releases the necessary amount of thread for the entanglement and... 

During the interlacing or the chaining process, different tensions appear in the thread by the take-up lever and/or shuttle movement. The thread tighteners are responsible for many different tasks. On the one hand they control the holding of... 

Figure 7-9. Spring and lever apparatus for friction. A Disk. B, B Rider. C Cantilever beam. D Strain gage. E Accelerometer. F Velocity transducer. G Speed reducer and turntable. H Backlash take-up W Loading weights. After Ko and Broc kley [8 ]. 

Take out lever. Push slide up and out, and then take out extractor. 

An inclined plane is any sloping surface. Many people have used an inclined plane at one time or another when they tried to push a wheelbarrow or a dolly up a sloping board into a truck. One major difference between an inclined plane and a lever is that motion always takes place with the latter, but not with the former. 

To take out the hammers, turn in the screws in bottom of the frame until the msunspring will allow the hammer to drop back far enough to allow its being lifted out of the frame. In putting back, be careful to press the projection on the lever on top of the spring that holds it. up to place, before putting the lever-screw in. 

Machines, processes, people, and whole situations are stored in the brain and can be recalled at will, like files from the hard disc of a computer. This cuts down enormously on the amount of information about any scene which an individual needs to take in in order to perceive and understand it. But where the real world differs from the expectation, problems occur. This is roost often the case with situations which go against population stereotypes, for example a machine on which moving a lever downwards turns it off. Other population stereotypes are red for danger and stop, clockwise turns the volume up or shuts the valve. These examples are very widely shared, but in other cases stereotypes for one population may contradict those held by others, e.g. you turn the light on by putting the switch down in Britain but by pushing it up in the USA and parts of Europe. 

---