Studying in composites

Rauch R.B. Wainright, Studies in Composition B , American Cyanamid Co Final Report... 

Polyethylene glycol (PEG) 4000, when spray-dried with lactose, has been shown to accelerate the rate and extent of crystallization of lactose. It has also been shown that spray-dried lactose composite particles containing an ion complex of chitosan are suitable for the dry-coating of tablets. Spray-dried lactose and crystallized spray-dried lactose have been evaluated for dry powder inhalation.Amorphous spray-dried lactose has also been studied in composites with PVP. ... 

In blends composed of immiscible polymers, amorphous polymer does not affect the crystallization of crystallizable polymer, but if two polymers are miscible, amorphous polymer acts as diluent and affects crystallization of the second polymer. Poly(E-caprolactone) is a crystallizable component of the blend with poly( vinyl butyral), which is studied in compositions containing carbon black. Typically, blends of these two polymers form very large spherulites, and it is interesting to find out how carbon black affects crystallization and other properties of the blend as well as the distribution of carbon black in relationship to the spherulites. Figure... 

Kamath GM, Sundaram R, Gupta N, Rao MS. Damage studies in composite structures for structural health monitoring using strain sensors. Struct Health Monit Int J 2010 9(6) 497-512. http //dx.doi.org/10.1177/1475921710365391. 

An important industrial example of W/O emulsions arises in water-in-crude-oil emulsions that form during production. These emulsions must be broken to aid transportation and refining [43]. These suspensions have been extensively studied by Sjoblom and co-workers [10, 13, 14] and Wasan and co-workers [44]. Stabilization arises from combinations of surface-active components, asphaltenes, polymers, and particles the composition depends on the source of the crude oil. Certain copolymers can mimic the emulsion stabilizing fractions of crude oil and have been studied in terms of their pressure-area behavior [45]. 

An example in which XPS is used for studying surface compositions and oxidation states is illustrated in... 

Clusters are intennediates bridging the properties of the atoms and the bulk. They can be viewed as novel molecules, but different from ordinary molecules, in that they can have various compositions and multiple shapes. Bare clusters are usually quite reactive and unstable against aggregation and have to be studied in vacuum or inert matrices. Interest in clusters comes from a wide range of fields. Clusters are used as models to investigate surface and bulk properties [2]. Since most catalysts are dispersed metal particles [3], isolated clusters provide ideal systems to understand catalytic mechanisms. The versatility of their shapes and compositions make clusters novel molecular systems to extend our concept of chemical bonding, stmcture and dynamics. Stable clusters or passivated clusters can be used as building blocks for new materials or new electronic devices [4] and this aspect has now led to a whole new direction of research into nanoparticles and quantum dots (see chapter C2.17). As the size of electronic devices approaches ever smaller dimensions [5], the new chemical and physical properties of clusters will be relevant to the future of the electronics industry. 

The foregoing discussion has been conducted in terms of Mi sequences. Additional relationships of the sort we have been considering also exist for dyads, triads, and so forth, of different types of specific composition. Thus an ability to investigate microstructure experimentally allows some rather subtle mechanistic effects to be studied. In the next section we shall see how such information is obtained. 

Dichromated Resists. The first compositions widely used as photoresists combine a photosensitive dichromate salt (usually ammonium dichromate) with a water-soluble polymer of biologic origin such as gelatin, egg albumin (proteins), or gum arabic (a starch). Later, synthetic polymers such as poly(vinyl alcohol) also were used (11,12). Irradiation with uv light (X in the range of 360—380 nm using, for example, a carbon arc lamp) leads to photoinitiated oxidation of the polymer and reduction of dichromate to Ct(III). The photoinduced chemistry renders exposed areas insoluble in aqueous developing solutions. The photochemical mechanism of dichromate sensitization of PVA (summarized in Fig. 3) has been studied in detail (13). 

Monomer compositional drifts may also occur due to preferential solution of the styrene in the mbber phase or solution of the acrylonitrile in the aqueous phase (72). In emulsion systems, mbber particle size may also influence graft stmcture so that the number of graft chains per unit of mbber particle surface area tends to remain constant (73). Factors affecting the distribution (eg, core-sheU vs "wart-like" morphologies) of the grafted copolymer on the mbber particle surface have been studied in emulsion systems (74). Effects due to preferential solvation of the initiator by the polybutadiene have been described (75,76). 

Chromium-containing wood preservatives and their chemical compositions are Hsted ia Table 13 (199). Chromium compounds have a triple function ia wood preservation (200). Most importantiy, after impregnation of the wood the Cr(VI) compounds used ia the formulations react with the wood extractives and the other preservative salts to produce relatively insoluble complexes from which preservative leaches only very slowly. This mechanism has been studied in the laboratory (201—206) and the field (207). Finally, although most of the chromium is reduced to chromium (ITT), there is probably some slight contribution of the chromium (VT) to the preservative value (208). 

When the concentration of dissolved coal exceeds about 5% of the solution by weight, the extracted material resembles the parent coal in composition and some properties. The extract consists of the smaller molecules within the range of the parent coal. Recovered extract is relatively nonvolatile and high melting. A kinetic study of coal dissolution indicated increasing heats of activation for increasing amounts of dissolved coal (69). 

The energy required to initiate an explosion and the maximum explosive pressure developed by a number of polyester—epoxy powder coatings has been studied in some detail (89). The variables studied included composition, level and type of pigmentation, particle size, and concentration in air. The lowest MEG for unfilled and unpigmented powders was 33—35 g/m. ... 

Jones, F.R., Interfacial aspects of glass fibre reinforced plastics. In Jones, F.R. (Ed.), Interfacial Phenomena in Composite Materials. Butterworths, London, 1989, pp. 25-32. Chaudhury, M.K., Gentle, T.M. and Plueddemann, E., Adhesion mechanism of poly(vinyl chloride) to silane primed metal surfaces. J. Adhes. Sci. Technol, 1(1), 29-38 (1987). Gellman, A.J., Naasz, B.M., Schmidt, R.G., Chaudhury, M.K, and Gentle, T.M., Secondary neutral mass spectrometry studies of germanium-silane coupling agent-polymer interphases. J. Adhes. Sci. Technol., 4(7), 597-601 (1990). 

---