Stress Corrosion Cracking and Embrittlement

Stress Corrosion Cracking and Embrittlement (Electrochem. Soc. Symposium), Ed. Robertson, W. D., Wiley, New York (1956) Physical Metallurgy of Stress-Corrosion Fracture (A.I.M.E. Symposium), Ed. Rhodin, T. N., Imerscience, New York (1959) ... 

R. Parkins, in Stress Corrosion Cracking and Embrittlement, W. Robertson, editor, Wiley, New York, 1956, p. 154. 

Robertson, W.D. and Bakish, R. (1956). Stress Corrosion Cracking and Embrittlement. New York John Wiley, p. 32. 

J. J. Harwood, The influence of stress on corrossion in Stress Corrosion Cracking and Embrittlement, WD Roberton, ed., John Wiley Sons, 1956, pp. 1-8. 

Virtuallv evety alloy system has its specific environment conditions which will prodiice stress-corrosion cracking, and the time of exposure required to produce failure will vary from minutes to years. Typical examples include cracking of cold-formed brass in ammonia environments, cracking of austenitic stainless steels in the presence of chlorides, cracking of Monel in hydrofluosihcic acid, and caustic embrittlement cracking of steel in caustic solutions. 

Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, NACE, Houston, Texas, (1975)... 

Parkins, R. N., from Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, Edited by R. W. Staehle, J. Hochmann, R. D. McCright and J. E. Slater, NACE, Houston, p601, (1977)... 

Nelson, H.G. and Williams, D.P., Quantitative observations of hydrogen-induced, slow crack growth in a low alloy steel, in Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, Staehle, R.W., Hochmann, J., McCright, R.D., and Slater, J.E., Eds., NACE, Houston, TX, 1977, pp. 390-404. 

C.S. Carter and M.V. Hyatt, Review of Stress Corrosion Cracking in Low Alloy Steels with Yield Strength below 150 KSI, Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys NACE 5, R.W. Staehle, J.H. Hochman, R.D. McCright, and J.E. Slater, Ed., National Association of Corrosion Engineers, 1973, p 524-600... 

---