Static plowing

Using lithography in contact mode the surface is modified by increasing the apphed normal load during the scan. The tip indents the sample and scratches the surface. This lithographic method is called also static plowing. 

A. Exchange between the Dynamic and Static Plowing Solids. 582... 

C.J. van Duijn, Andro Mikelic, I.S. Pop, and Carole Rosier, Effective Dispersion Equations for Reactive Plows with Dominant Peclet and Damkohler Numbers Mark Z. Lazman and Gregory S. Yablonsky, Overall Reaction Rate Equation of Single-Route Complex Catalytic Reaction in Terms of Hypergeometric Series A.N. Gorban and O. Radulescu, Dynamic and Static Limitation in Multiscale Reaction Networks, Revisited... 

The field trial was conducted in ten steps, as shown in Table 2. All trials were conducted with the tractor engaged in first gear, ranging in the gear reduced and simple. The tractor was subjected to three situations static operation (tractor stopped only in operation) and dynamic operation (tractor only moving) and performing plowing (30 cm depth). 

---