Spring-loaded pressing device

Temperature sensors, mostly type PtlOO with spring-loaded pressing device and seal, are used to set the demolding time by the mold temperature. 

A novel device was designed to estimate the dislodgeability of dust-associated pesticide residues by skin contact (Edwards and Lioy, 1999). Called the EL Sampler , the device consists of a spring-loaded assembly that permits the sampling medium to be pressed lightly (12g/cm or 1160 Pa) onto the surface to be monitored. A 10-cm x 15-cm Empore C-18 extraction membrane was used for the sampling medium. The material was chosen after controlled experiments on particle adhesion showed it to pick up the same distribution of test dust particle sizes as the human hand. In studies in which the EL sampler was pressed onto polyethylene surfaces coated with house dust and then sprayed with a solution of pesticides in 2-propanol, the device was found to collect 35%, 31 %, 32% and 18 %, respectively, of chlorpyrifos, diazinon (0,0-diethyl 0-[6-methyl-2-(l-methylethyl)-4-pyrimidinyl] phosphorothioate), malathion and atrazine (6-chloro-A -ethyl-A -isopropyl-l,3,5-triazine-2,4-diamine). Parallel studies with human hand presses (full hand at 6.8 kg = ca. 6900 Pa) yielded collection efficiencies of 42 %, 29 %, 43 % and 21 %, respectively. 

---