Specific gravity of oil

The specific gravities of oils and alcohols are about 0.8, of water 1.0, and of mercury 13,h. Alcohol has a low surface tension however, it tends to absorb water and evaporate, and its density varies considerably with temperature. 

Reported values were converted from ml oil/g to % by multiplying by specific gravity of oil and multiplying... 

H, = Design annual storm surge, ft (S G. ) - Specific gravity of oil... 

S = Specific gravity ol water at design temperature So - Specific gravity of oil at design temperature... 

Vt = volume of the actual flow channel, bbl (m3) y = specific gravity of oil = specific gravity of water fiH - viscosity of water, cp (Pa s) a2d) = variance of the distribution with respect to time... 

Oil and Water Specific Gravity. Specific gravity of oil and water should be furnished for both winter and summer seasons, along with minimum and maximum figures. 

Carbon Tetrachloride or other Chlorinated Compounds.— These products, having density above 1, increase the specific gravity of oil of turpentine, and lower its boiling point. They may be identified by testing for chlorine as follows ... 

Emulsifiers certain organic chemicals such as soaps and detergents can lower specific gravity of oil causing separating oil from water by gravity to be more difficult. This process widely used in industrial application to dilute oil with water without stratification. 

Steam flooding treatment was also carried out on the Binagady-Kirmakin reservoir. Pertinent data for this project was as follows surface area-59.2 hectares pay zone treated -producing bed KS a+b depth of reservoir-between 250 and 500 m effective thickness of the reservoir bed-12.5 m permeability-59 millidarcies oil recovery factor-0.19 oil viscosity under reservoir conditions-30 centipoise specific gravity of oil-0.918 g/cm tar content-30%, asphalts -1.2%. Steam injection began in August 1972 and it was terminated in December 1978 (Table 26). 

Thickness of oil-bearing bed, m Specific gravity of oil, g/cm3 formation temperature, OC air injection pressure prior to ignition, kg/cm quantity of air injected prior to ignition, lOOOm /day calculated time required to ignite the bed... 

Lin SJ, Wu WH. 1991. Physical parameters and release behaviors of W/OAV multiple emulsions containing cosurfactants and different specific gravity of oils. Pharm Acta Helv 66(12) 342-347. 

The greater the differential between me specific gravity of oil and me continuous phase, water, me faster me rate of rise. Thus, me specific gravity of number 2 fuel oil is 0.85, while that of number 6 fuel oil is 0.95. The differentials from fresh... 

---