Solutions cont concentrated solution

Ammonia (cont) concentrated solution 60 8 Resistant Vestamid Huls America... 

Ammonia (cont) concentrated solution 23 28 8 Excellent resistance no change observed 0.7 95 89 Isoplast 301 Dow Chemical Specimen 3.2 mm (0.125 in) thick injection molded samples... 

Introduction.— Having discussed briefly the theory of dissoluti( consider some of the ways in which the dissolution of solids in liqi plished in actual practice. The problem is evidently to bring cont. solution in contact with the solid particles that is, different solution it may not be any less concentrated with the solute than the solution ir a from around the particles still the mere friction of this displacement sex reduce the thickness of the film surrounding it. Therefore it would seen the most efficient way to accomplish this is to move the solid through the sol or the solution through the particles or to move both in opposite direct while in contact with each other. 

The feasibility of Ru as a permanent modi her for the determination of Cd in biological samples treated with TMAH by ET-AAS was investigated [10]. The sample dissolution procedure was very simple a sample aliquot was mixed with a small volume of a 25 percent TMAH solution, the volume was made up to 50 mL and the mixture was kept at 60°C for 1 h. Four biological CRMs (DOLT-2, DORM-1, LUST-1, and TORT-2) were analyzed and the obtained Cd concentrations were within the 95 percent cont>dence interval of the certified values. 

KoL,cont = overall coefficient for the diffusing species (i.e., solute), cm/s C = mass concentration in bulk continuous phase, g/cm ... 

Figure 17.11 (cont.) Equilibrium adsorption isotherms of different organic solutes onto (a) modified cellulose fibres, and (b) virgin fibres, as a function of the equilibrium solute concentration at pH 6.5-7 and room temperature. ... 

---