Solid Slags

The technology treats soil, nonmunicipal sludge, and natural sediment, and potentially treats solid slag. In January, 2000, the TDU was offered as an asset available for liquidation by National Industrial Services, Inc. 

Measurements on solid slags have been reported linear heat-flow method),... 

Slag reduction is a less economic exercise than smelting of high-lead content material directly to bullion, particularly with solid slag processed on a campaign basis. This step will, however, usually need to be carried out to meet TCLP requirements for long term storage of the... 

In the beginning stage of this Campaign, the quantity ratio between the charges of liquid and solid slags was 70 30. However, the ratios improved to 94 6 in 1998 and 87 13 in 1999. 

MgS04 solid Solid sul te solution Liquid sul te solution Na2S04 liquid MgSi03 solid Na2Mg2Si6015 solid Slag... 

Poor weld penetration is often accompanied by porosity. Kou and Wang [42] proposed that the direction of the flow in the weld pool could be responsible for the presence of pores in the weld. When the flow is radially inward the weld pool motion will assist the escape of bubbles away from the solidification front (Figure 23a). In contrast, when the flow is radially outward the bubbles will tend to be swept towards the solidification front (Figure 23b). It is obvious that the presence of a solid-slag film at the rear of the pool will tend to create a stagnant region which will assist the entrapment of gas bubbles by the solidification front, thus it is not... 

Solid slag layer Liquid slag layer... 

---