Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Softening Point Ring Ball

Table 4-47 shows the consistency data needle penetration (DIN 52 010, ASTM D 5-73) and softening point ring ball (DIN 52 Oil, ASTM D 2398-68)... [Pg.189]

Vaporization Start Temperature T5 % versus Softening Point Ring Ball... [Pg.205]

Crackable Residue CR of the Dispersion Medium versus Softening Point Ring Ball of Bitumen... [Pg.209]

Fig. 4-82 Aging in the Rotating Flask of Bitumen and PMB (DIN 52 017) Relative Change in Softening Point Ring Ball (DIN 52 011)... Fig. 4-82 Aging in the Rotating Flask of Bitumen and PMB (DIN 52 017) Relative Change in Softening Point Ring Ball (DIN 52 011)...
Notes Pot life + worklife, these, plus viscosity, decrease with increasing Notes Softening point (ring ball) 80 C. ... [Pg.267]

Appearance light brown to brown pastilles Softening point (ring/ball) 86-lOOC Sulfate ash max. 0.4% of weight Ralox TMQ-T ... [Pg.57]

Trinidad asphalt has a relatively uniform composition of 29% water and gas, 39% bitumen soluble in carbon disulfide, 27% mineral matter on ignition, and 5% bitumen that remains adsorbed on the mineral matter. Refining is essentially a process of dehydration by heating the cmde asphalt to ca 165°C. The refined product averages 36% mineral ash with a penetration at 25°C of about 2 (0.2 mm), a softening point (ring and ball method) of 99°C, a flash point (Cleveland open cup) of 254°C, a sulfur content of 3.3%, and a saponification value of 45 mg KOH/g. The mineral matter typically contains... [Pg.359]

Softening Point (Ring and Ball Method, ASTM D36). The softening point of an asphalt may be defined as that temperature at which... [Pg.371]

CEN EN 1427. 2007. Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method. Brussels CEN. [Pg.167]

Notes Softening point Ring and ball (ASTM E28). Heat resistance and open time Notes Softening point Ring and ball (ASTM E28). Heat resistance and open time ... [Pg.346]

Notes Softening point Ring and ball. Notes - ... [Pg.349]

Softening point for bitumen (ring and ball method) NF T 66-008 (future NF EN 1427) ASTM D 36 Temperature at which a ball passes through tin asphalt sample disk attached to a ring... [Pg.450]

See other pages where Softening Point Ring Ball is mentioned: [Pg.496]    [Pg.496]    [Pg.496]    [Pg.496]    [Pg.496]    [Pg.187]    [Pg.266]    [Pg.268]    [Pg.496]    [Pg.496]    [Pg.496]    [Pg.496]    [Pg.496]    [Pg.187]    [Pg.266]    [Pg.268]    [Pg.360]    [Pg.363]    [Pg.363]    [Pg.369]    [Pg.371]    [Pg.372]    [Pg.53]    [Pg.212]    [Pg.360]    [Pg.363]    [Pg.363]    [Pg.369]    [Pg.372]    [Pg.1]    [Pg.113]    [Pg.349]    [Pg.102]    [Pg.199]    [Pg.289]    [Pg.312]    [Pg.350]    [Pg.138]   
See also in sourсe #XX -- [ Pg.113 , Pg.187 , Pg.194 ]



SEARCH



SOFTEN

Softens

© 2024 chempedia.info