Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Sodium hydoxide

Addition of A-mesityl benzimidazolyl carbene 720 to an a,/3-unsaturated aldehyde generates a homoenolate intermediate that undergoes an addition/acylation sequence with azomethine imine 719 to afford (3R, 5S, 6S )-177-pyrazolo[l,2- ]pyridazine-l,8(5//)-diones 721 with excellent diastereoselectivity. Compound 721 (Ar = R = Ph) treated with sodium hydoxide in methanol or benzylamine provided nearly quantitatively, ring-opened products 722a and 722b, respectively (Scheme 116) <2007JA5334>. [Pg.471]

Procedure 1.5 g of freshly ignited and cooled zinc oxide is accurately weighed and dissolved with 2.5 g of ammonium chloride in 50 ml of 1 N sulphuric acid with the help of gentle heating. After complete dissolution, add methyl orange and titrate the excess of sulphuric acid with 1 N sodium hydoxide. Each millilitre of 1 N sulphuric acid is equivalent to 40.6 mg of ZnO. [Pg.100]

Terfenadine Cinchonidine Sodium hydoxide Trimethylsilyliodide Sodium borohydride... [Pg.1608]

Acetyl chloride Morpholine Acetic acid Sodium hydoxide Sulfuric acid Crotyl bromide... [Pg.3478]

Prepare water solution of Kelzan xanthan gum then add Antaron. Separately, prepare the 40% sodium hydoxide solution and slowly add to mix. For aerosol use charge with 80% mixture and 20% of 1 1 mix of Genetron 12 and 114,... [Pg.139]

Disproportionation of the aldehyde and acetale groups pending on the polymer backbone by means of sodium hydoxide solution (Cannizzaro reaction) [73-75] ... [Pg.615]

The Chlorine Institute, Pamphlet 65, Personal Protective Equipment for Chlorine and Sodium Hydoxide , Ed. 3, November 1995. [Pg.238]

Borane-hydrogen peroxide sodium hydoxide BHg-H202 NaOH... [Pg.50]

As for the case in PAn, the conductivity of PPy and poly(N-methylpyrrole) films is also strongly affected by the applied potential in liquid SO2 [171]. Van Dyke et al [172] reported that the potential domain in which PPy is conductive can be extended in non-aqueous media, e.g., acetonitrile. Normally, the PPy films are conductive above about —0.4 V vs. SCR but this can be extended down to about —1.1 V by simply treating the doped film with sodium hydroxide. This effect was attributed to the shift in the reduction potential of hydoxide-doped PPy because of its large association constant with oxidized pyrrole sites. [Pg.446]


See other pages where Sodium hydoxide is mentioned: [Pg.258]    [Pg.619]    [Pg.222]    [Pg.258]    [Pg.619]    [Pg.222]    [Pg.225]    [Pg.146]   
See also in sourсe #XX -- [ Pg.485 ]




SEARCH



© 2024 chempedia.info