Sinter fumes

Zinc Roasting Sintering Calcining Retorts electric arc Particulates (dust) and SO2 Particulates (dust) and SO2 Zinc oxide fume, particulates, SO2, CO Exhaust system, humidifier, cyclone, scrubber, electrostatic precipitator, and acid plant Exhaust system, humidifier, electrostatic precipitator, and acid plant Exhaust system, baghouse, scrubber or acid plant... 

Steel mills Blast furnaces charging, pouring CO, fumes, smoke, particulates (dust) Good maintenance, seal leaks use of higher ratio of pelletized or sintered ore CO burned in waste-heat boilers, stoves, or coke ovens cyclone, scrubber, and baghouse... 

Phosphorus pentabromide [7789-69-7] M 430.6, m <100 , b 106 (dec). Dissolved in pure nitrobenzene at 60°, filtering off any insoluble residue on to sintered glass, then crystallised by cooling. Washed with dry Et20 and removed the ether in a current of dry N2. (All manipulations should be performed in a dry-box.) [Harris and Payne J Chem Soc 3732 1958]. Fumes in moist air because of hydrolysis. HARMFUL VAPOURS. 

Gases from the sintering process contain SO2, dust, and metal oxide fumes. The blast furnace gases contain similar particulates plus SO2 and CO. Table 30-10 indicates the expected SO2 emissions. 

Dusfs, fumes, and SO2 are evolved during sintering, retorhng, and roasting, as shown in Table 30-11. 

Calcining, sintering or smelting of nickel copper matte or acid leaching or electrorefining of roasted matte Coal soots, coal tar, pitch and coal tar fumes Hardwood dusts... 

Bartholomew and coworkers32 described deactivation of cobalt catalysts supported on fumed silica and on silica gel. Rapid deactivation was linked with high conversions, and the activity was not recovered by oxidation and re-reduction of the catalysts, indicating that carbon deposition was not responsible for the loss of activity. Based on characterization of catalysts used in the FTS and steam-treated catalysts and supports the authors propose that the deactivation is due to support sintering in steam (loss of surface area and increased pore diameter) as well as loss of cobalt metal surface area. The mechanism of the latter is suggested to be due to the formation of cobalt silicates or encapsulation of the cobalt metal by the collapsing support. 

---