Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Single-walled carbon nanohorn

Nanocarbons other than CNTs and graphene often exhibit similar surface chemistry and can be hybridized in a similar fashion. For example, single-walled carbon nanohorns (SWCNHs) have been oxidized via heat treatment in air atmosphere followed by immersion in a solution containing H2PtCl6. The Pt ions adsorbed to the oxidized SWCNHs and were then reduced via addition of sodium citrate to form Pt NPs [150],... [Pg.152]

Liu, Y., et ah, Metal-assisted hydrogen storage on Pt-decorated single-walled carbon nanohorns. Carbon, 2012. 50(13) p. 4953-4964. [Pg.164]

Battiston, S. Minella, M. Gerbasi, R. Visentin, F. Guerriero, P. Leto, A. Pezzotti, G. Miorin, E. Fabrizio, M. Pagura, C., Growth of titanium dioxide nanopetals induced by single wall carbon nanohorns. Carbon 2010,48 2470-2477. [Pg.453]

H. Tanaka, H. Kanoh, M. El-Merraoui, W.A. Steele, M. Yudasaka, S. Ijiima, K. Kaneko, Quantum effects on hydrogen adsorption in internal nanospaces of single-wall carbon nanohorns. J. Chem. Phys. B, 108(45) (2004) 17457-17465. [Pg.319]

Figure 29. Fiuman osteoblast-like MG 63 cells in cultures on material surfaces modified with carbon nanoparticles. A fullerene Cgo layers deposited on carbon fibre-reinforced carbon composites (CFRC), B fullerene C o layers deposited on microscopic glass coverslips, C terpolymer of polytetrafluoroethylene, polyvinyldifluoride and polypropylene, mixed with 4% of single-wall carbon nanohorns, D the same terpolymer with high crystalline electric arc multi-wall nanotubes, E diamond layer with hierarchically organized micro- and nanostmcture deposited on a Si substrate, F nanocrystalline diamond layer on a Si substrate. Standard control cell culture substrates were represented by a PS culture dish (G) and microscopic glass coverslip (FI). Immunofluorescence staining on day 2 (A) or 3 (B-Fl) after seeding, Olympus epifluorescence microscope IX 50, digital camera DP 70, obj. 20x, bar 100 pm (A, C, D, G,H)or 200 pm (B, E, F) [16]. Figure 29. Fiuman osteoblast-like MG 63 cells in cultures on material surfaces modified with carbon nanoparticles. A fullerene Cgo layers deposited on carbon fibre-reinforced carbon composites (CFRC), B fullerene C o layers deposited on microscopic glass coverslips, C terpolymer of polytetrafluoroethylene, polyvinyldifluoride and polypropylene, mixed with 4% of single-wall carbon nanohorns, D the same terpolymer with high crystalline electric arc multi-wall nanotubes, E diamond layer with hierarchically organized micro- and nanostmcture deposited on a Si substrate, F nanocrystalline diamond layer on a Si substrate. Standard control cell culture substrates were represented by a PS culture dish (G) and microscopic glass coverslip (FI). Immunofluorescence staining on day 2 (A) or 3 (B-Fl) after seeding, Olympus epifluorescence microscope IX 50, digital camera DP 70, obj. 20x, bar 100 pm (A, C, D, G,H)or 200 pm (B, E, F) [16].
H. Wang, M. Chhowalla, N. Sano, S. Jia, G.A.J. Amaratunga, Large-scale synthesis of single-walled carbon nanohorns by submerged arc. Nanotechnology, 15 (2004) 546-550. [Pg.319]

Yoshitake, T. et al.. Preparation of fine platinum catalyst supported on single-wall carbon nanohorns for fuel cell application, Physica B, 323, 124, 2002. [Pg.302]

Separation of adsorption isotherms of N2 in internal and interstitial nanopores of single-walled carbon nanohorn - A comparative study with experiment and simulation... [Pg.521]

N2 adsorption isotherms in internal and ineterstitial nanopores of single wall carbon nanohorn (SWNH) were calculated by GCMC simulation and is compared with experimental one. Fitting of the GCMC-simulated isotherm to experimental one in internal nanopores gave the average pore width w = 2.9 nm. The N2 adsorption isotherm in the interstitial nanopores of the bundled SWNH particles well coincided with the observed one. [Pg.521]

Other Carbon Nanostructures. Raman spectroscopy was used to characterise single-walled carbon nanohorns (SWCNH).285 Similar methods were... [Pg.211]

Murata, K., Kaneko, K., Steele, W.A., et al. (2001). Molecular potential structures of heat-treated single-wall carbon nanohorn assembhes. J. Phys. Chem. B, 105, 10210-16. [Pg.185]

Murakami T, Sawada H, Tamura G, et al. Water-dispersed single-wall carbon nanohorns as drug carriers for local cancer chemotherapy. Nanomed 2008 3 453-463. [Pg.267]

Figure 12. Population density (A) and adhesion area (B) of osteoblast-like MG 63 cells on day 2 after seeding on tissue culture polystyrene dish (TCPS). carbon fibrereinforced carbon composites (CFRC) and CFRC coated with a fullerene layer (CFRC+full). C Growth curves of MG 63 cells on a terpolymer of polytetrafluoroethylene. poljcvinyldifluoride and polypropylene (Ter), terpolymer mixed with 4 wt. % of single-wall carbon nanohorns (SWNH) or 4 wt.% of high crystalline electric arc multi-wall nanotubes (MWNT-A). D Growth curves of MG 63 cells on TCPS. a nanostructured diamond layer (Nano) and a layer with hierarchically organized micro-and nanostructure (Micro-Nano). Mean S.E.M. from 4-12 measurements. ANOVA. Student-Newman-Keuls method. Statistical significance TCPS. CFRC. Ter p<0.05 compared to the values on tissue culture polystyrene, pure CFRC and pure terpolymer [23]. Figure 12. Population density (A) and adhesion area (B) of osteoblast-like MG 63 cells on day 2 after seeding on tissue culture polystyrene dish (TCPS). carbon fibrereinforced carbon composites (CFRC) and CFRC coated with a fullerene layer (CFRC+full). C Growth curves of MG 63 cells on a terpolymer of polytetrafluoroethylene. poljcvinyldifluoride and polypropylene (Ter), terpolymer mixed with 4 wt. % of single-wall carbon nanohorns (SWNH) or 4 wt.% of high crystalline electric arc multi-wall nanotubes (MWNT-A). D Growth curves of MG 63 cells on TCPS. a nanostructured diamond layer (Nano) and a layer with hierarchically organized micro-and nanostructure (Micro-Nano). Mean S.E.M. from 4-12 measurements. ANOVA. Student-Newman-Keuls method. Statistical significance TCPS. CFRC. Ter p<0.05 compared to the values on tissue culture polystyrene, pure CFRC and pure terpolymer [23].
Yuge, R., Ichihashi, T, Shimakawa, Y. et al. (2004) Preferential deposition of pt nanoparticles inside single-walled carbon nanohorns. Adv. Mater., 16,1420-1423. [Pg.291]

Utsumi S., Miyawaki J., Tanaka H., Hattori Y., Itoi T., Ichikuni N., Kanoh H., Yudasaka M., lijima S. and Kaneko K., Opening mechanism of internal nanoporosity of single wall carbon nanohorn. J. Phys. Chem. B 109 (2005) pp. 14319-14324. [Pg.55]

Poonjarernsilp, C., Sano, N., Tamon, H., 8c Charin-panitkul, T. (2009). A model of reaction field in gas-injected arc-in-water method to synthesize single-walled carbon nanohorns Influence of water temperature. Journal of Applied Physics, 106,104315-1-104315-7. [Pg.862]


See other pages where Single-walled carbon nanohorn is mentioned: [Pg.156]    [Pg.319]    [Pg.15]    [Pg.521]    [Pg.114]    [Pg.257]    [Pg.58]    [Pg.65]    [Pg.416]    [Pg.47]    [Pg.116]   
See also in sourсe #XX -- [ Pg.425 ]




SEARCH



Carbon nanohorn

Carbon nanohorns

Nanohorns

Single-walled

Single-walled carbon

Single-walled carbon nanohorns

Single-walled carbon nanohorns

© 2024 chempedia.info