Single-step polymerization

In this application bimodal pressure-sensitive adhesives consisting of C i C i x polymethacrylates were prepared that exhibited high adhesion to low solubility threshold (LSE) substrates at ambient temperature and at elevated temperature. These materials were free radically prepared in a two-stage single-step polymerization process. 

Homogeneous ideal networks, also called closed networks, result from a single-step polymerization mechanism of a stoichiometric mixture of monomers, reacted to full conversion. Many amine-crosslinked epoxies of Tg < 200°C and polyurethanes obtained using a single isocyanate monomer and a single polyol belong to this family. 

Hyper-branched polymers are prepared in a single-step polymerization from ABX monomers. Thus, a perfectly branched structure is present in dendrimers, whereas irregular branching is present in hyper-branched polymers. Aluminum alkoxide-based initiators or tin-based catalysts have been successfully used for the preparation of, hyper-branched [160-162, 166-168], dendrimer-like star polymers [160], and star-shaped polymers. The first and second generations of the benzyl ester of 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) are effective initiators for the ROP of lactones (e-CL) in the presence of Sn(Oct)2. The... 

Another method to synthesize polyanhydrides is by dehydrative coupling of two carboxyl groups. Even though this method produces lower molecular weight products (mostly oligomers) compared with the methods described above, it is a single step polymerization where a dicarboxylie acid monomer can be directly converted into the polymer. Moreover, it can be conducted at low temperatures suitable for monomers that cannot resist harsh reaction conditions. 

Compared with their perfect dentrimer congeners, imperfect hyperbranched polymers often exhibit similar, or even comparable, molecular properties despite their random and polydisperse strnctnres. Nevertheless, they can be readily prepared by single-step polymerization procednres, allowing access to large-scale production and thus widening their potential uses and applications. 

In some instances, the resist polymer can be prepared in a single step by direct polymerization of the protected monomer(s) (37,88), entirely avoiding the intermediate PHOST. HOST-containing resist polymers have also been prepared by free-radical copolymerization of a latent HOST and a stable, acid-labile monomer, eg, the copolymerization of acetoxystyrene with tert-huty acrylate, followed by selective removal of the acetoxy group (89) (Fig. 30). 

Polymerization of the dianhydride and diamine proceeds through an intermediate poly(amide acid) stage before ring closure converts the adjacent acid and amide groups to the polyetherimide (94). The polymerization can be carried directiy to the polyetherimide as a single-step process, or first to an ainide—acid-containing prepolymer, which can be isolated, and then to the polyetherimide. 

NMP are examples of suitable solvents for PES and PPSF polymerizations. Chlorobenzene or toluene are used as cosolvents at low concentrations. These cosolvents form an azeotrope with water as they distill out of the reaction mixture, thereby keeping the polymerization medium dehydrated. Potassium carbonate is a suitable choice for base. The synthesis of PES and PPSE differ from the PSE case in that the reaction is carried out in a single-step process. In other words, the formation of the dipotassium salt of the bisphenol is not completed in a separate first step. Equations 2 and 3 represent polymerizations based on the dipotassium salts of bisphenol S and biphenol to make PES and PPSE, respectively. 

The existence of a single step with a collision efficiency of 10 2 in the sequence of reactions would be insufficient to account for the absence of ionic polymerization since an over-all efficiency of about 10 5 is required by this mechanism within the first five reactions. Thus, at least two low efficiency steps are required in each series. Although... 

Step polymerizations of linear chains can involve either two different bifunctional monomers in which each monomer possesses only one type of functional group (commonly represented by X-X or Y-Y), or a single monomer containing both types of functional groups (common representation X-Y). However, whatever the monomer type, a linear polymer molecule contains, on average, one functional group of each species per chain (molecule). 

However, pyrolysis is rapid, avoids sample wet chemical workup, avoiding sample loss and contamination, and has a low sample requirement. It allows the determination, in a single step, of polymeric materials (with in situ hydrolysis of the hydrolysable polymers and thermal decomposition of the nonhydrolysable polymers) and low molecular weight components [16]. As a result, pyrolysis is a relatively fast and inexpensive technique, especially if compared with the classical wet analytical procedures that are required prior to GC/MS analyses. 

Carbodiimide coupling to carboxylate-containing QDs usually involves the use of EDC in a single-step or two-step process to form an amide bond. If a one-step reaction is done, the QD is activated with EDC in the presence of an amine-containing molecule, such as a protein. Many protocols use this method, but it can result in protein polymerization in addition to coupling, because proteins contain both carboxylates and amines. A two-step protocol results in better control of the reaction (Figure 9.61). In the first step, EDC is used in the presence of sulfo-NHS to activate the carboxylates on the particles to intermediate sulfo-NHS esters. After a quick separation step to remove excess reactants, the activated QDs are added to the protein solution to be coupled. This then results in amide bond formation without polymerization of the protein in solution. See Chapter 3, Section 1 and Chapter 14, Section 1 for additional information on this process. 

Figure 18.25 Amino-PEG -carboxylate compounds contain a primary amine on one end and a carboxylate group on the other end. They can be used to add water-soluble spacer arms to molecules or surfaces. Using an amine-reactive group, the amino-PEG -carboxylate compound can be coupled via an amide bond, thus leaving the carboxylate end free for further conjugation reactions. Avoid the use of single-step EDC conjugation reactions, as this will polymerize the amino-PEGK-carboxylate by reacting with both ends.

Bz s-imidoesters like DMS may be used to couple proteins to PE-containing liposomes by crosslinking with the amines on both molecules (Figure 22.24). However, single-step crosslinking procedures using homobifunctional reagents are particularly subject to uncontrollable polymerization of protein in solution. Polymerization is possible because the procedure is done with the liposomes, protein, and crosslinker all in solution at the same time. 

---