Separation above glass transition temperature

Elastomeric Modified Adhesives. The major characteristic of the resins discussed above is that after cure, or after polymerization, they are extremely brittie. Thus, the utility of unmodified common resins as stmctural adhesives would be very limited. Eor highly cross-linked resin systems to be usehil stmctural adhesives, they have to be modified to ensure fracture resistance. Modification can be effected by the addition of an elastomer which is soluble within the cross-linked resin. Modification of a cross-linked resin in this fashion generally decreases the glass-transition temperature but increases the resin dexibiUty, and thus increases the fracture resistance of the cured adhesive. Recendy, stmctural adhesives have been modified by elastomers which are soluble within the uncured stmctural adhesive, but then phase separate during the cure to form a two-phase system. The matrix properties are mosdy retained the glass-transition temperature is only moderately affected by the presence of the elastomer, yet the fracture resistance is substantially improved. 

Molecular Motion in amorphous atactic polystyrene (PS) is more complicated and a number of relaxation processes, a through 5 have been detected by various techniques as reviewed recently by Sillescu74). Of course, motions above and below the glass transition temperature Tg have to be treated separately, as well as chain and side group mobility, respectively. Motion well above Tg as well as phenyl motion in the glassy state, involving rapid 180° jumps around their axes to the backbone has been discussed in detail in Ref.17). Here we will concentrate on chain mobility in the vicinity of the glass transition. 

Wood Hill (1991b) induced phase-separation in the clear glasses by heating them at temperatures above their transition temperatures. They found evidence for amorphous phase-separation (APS) prior to the formation of crystallites. Below the first exotherm, APS appeared to take place by spinodal decomposition so that the glass had an intercoimected structure (Cahn, 1961). At higher temperatures the microstructure consisted of distinct droplets in a matrix phase. 

---