Screw/barrel bridging

The basic operation of a single screw extruder is rather straightforward. Material enters from the feed hopper. Generally, the feed material flows by gravity from the feed hopper down into the extruder barrel. Some materials do not flow easily in dry form and special measures have to be taken to prevent hang-up (bridging) of the material in the feed hopper. 

For uniform and stable extrusion it is important to check periodically the drive system, the take-up device, and other equipment, and compare it to its original performance. If variations are excessive, all kinds of problems will develop in the extruded product. An elaborate process-control system can help, but it is best to improve stability in all facets of the extrusion line. Some examples of instabilities and problem areas include 1) non-uniform plastics flow in the hopper 2) troublesome bridging, with excessive barrel heat that melts the solidified plastic in the hopper and feed section and stops the plastic flow 3) variations in barrel heat, screw heat, screw speed, the screw power drive, die heat, die head pressure, and the take-up device 4) insufficient melting or mixing capacity 5) insufficient pressure-generating capacity 6) wear or damage of the screw or barrel 7) melt fracture/sharkskin (see Chapter 2), and so on. 

---