Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Schematic of system

Figure 15. Schematic of systems providing negative resists through precisely controlled cross-linking, such as in epoxy systems. Figure 15. Schematic of systems providing negative resists through precisely controlled cross-linking, such as in epoxy systems.
Fig. 6. Schematic of system shows sunlight reflected and focused on the receiver, with reflected infrared directed to a fiber-optics light pipe for transport to a high-temperature solid-oxide electrolysis cell. Solar electricity is sent to the same electrolysis cell, which is able to use both... Fig. 6. Schematic of system shows sunlight reflected and focused on the receiver, with reflected infrared directed to a fiber-optics light pipe for transport to a high-temperature solid-oxide electrolysis cell. Solar electricity is sent to the same electrolysis cell, which is able to use both...
FIG. 21 Schematic of system for liquid phase water purification. [Pg.42]

Figure 1. Schematic of system utilized for plating in a corona discharge... Figure 1. Schematic of system utilized for plating in a corona discharge...
Figure 26.4 Schematic of system-level modeling of an APU SOFC system. Figure 26.4 Schematic of system-level modeling of an APU SOFC system.
FIG. 6 Schematic of system energy ehange with the shift of attachment position of meniseus on a horizontal plate the system becomes unstable when the energy mono-tonically decreases in the direction of the shift. [Pg.396]

A schematic of the two-level refrigeration system is shown in Fig. 6.406. It should be noted that the single exchangers represented in Fig. 6.406 might in practice be several exchangers. [Pg.208]

Figure 10.9 Schematic of a typical steam system. (From Smith and Petela, Chem. Eng., 523 32, 1992 reproduced by permission of the Institution of Chemical Engineers.)... Figure 10.9 Schematic of a typical steam system. (From Smith and Petela, Chem. Eng., 523 32, 1992 reproduced by permission of the Institution of Chemical Engineers.)...
Ship-shaped FPSOs must be designed to weather vane i.e. must have the ability to rotate in the direction of wind or current. This requires complex mooring systems and the connections with the well heads must be able to accommodate the movement. The mooring systems can be via a single buoy or, in newer vessels designed for the harsh environments of the North Sea, via an internal or external turret. Figure 10.33 shows a schematic of the Shell-BP Foinaven FPSO. [Pg.266]

Fig. 4. A schematic of the plasma source ion implantation system, a plasma source chamber linked to a high voltage pulser. The plasma can be created from... Fig. 4. A schematic of the plasma source ion implantation system, a plasma source chamber linked to a high voltage pulser. The plasma can be created from...
Fig. 5. Schematic of the Kennedy van Saun (KVS) patented low pressure drop (LPD) preheater/rotary kiln lime calcining system available in sites... Fig. 5. Schematic of the Kennedy van Saun (KVS) patented low pressure drop (LPD) preheater/rotary kiln lime calcining system available in sites...
Eig. 3. Schematic of a pressurized water reactor system. Eission heat is extracted by the lightwater coolant. The steam drives the turbine-generator. [Pg.214]

Pig. 5. Schematics of (a) direct-firing hot-fan system for pulverized coal and (b) low NO burner for coal firing. [Pg.8]

A schematic of a SCR system is shown in Figure 7. Systems capable of operating at higher temperatures than those shown in Figure 7b were under development as of 1995. [Pg.9]

Fig. 8. Schematic of an analy2er subsystem where (-) represents the line to and from the control system. The sample conditioner is usually located on... Fig. 8. Schematic of an analy2er subsystem where (-) represents the line to and from the control system. The sample conditioner is usually located on...
Fig. 6. Schematic of magnetic separation systems where N and S denote the poles of the magnets (a) plate and (b) grate magnet. Fig. 6. Schematic of magnetic separation systems where N and S denote the poles of the magnets (a) plate and (b) grate magnet.
Fig. 21. Schematic of a pressurized-water-loop reactor coolant system. Fig. 21. Schematic of a pressurized-water-loop reactor coolant system.
Fig. 25. Schematic of large fossil steam turbine system where BFPT = boiler feed pump turbine. To convert MPa to psi, multiply by 145. Fig. 25. Schematic of large fossil steam turbine system where BFPT = boiler feed pump turbine. To convert MPa to psi, multiply by 145.
Fig. 3. Schematics of ahquid two-phase reactor system for 2-bromothiophene. Fig. 3. Schematics of ahquid two-phase reactor system for 2-bromothiophene.
The induction of systemic toxicity may involve a variety of complex interrelationships between the absorbed parent material, any conversion products, and their concentration and distribution in body tissues and fluids. The general pathway that a material may foUow after its absorption is shown schematically in Eigure 2. [Pg.230]

Fig. 4. Schematic of a pressurized dissolved air flotation system, (a) Influent pressurization (b) recycle pressurization. Fig. 4. Schematic of a pressurized dissolved air flotation system, (a) Influent pressurization (b) recycle pressurization.

See other pages where Schematic of system is mentioned: [Pg.264]    [Pg.264]    [Pg.208]    [Pg.264]    [Pg.40]    [Pg.790]    [Pg.1740]    [Pg.47]    [Pg.44]    [Pg.45]    [Pg.41]    [Pg.81]    [Pg.239]    [Pg.244]    [Pg.347]    [Pg.353]    [Pg.52]    [Pg.263]    [Pg.62]    [Pg.430]    [Pg.121]    [Pg.235]    [Pg.483]    [Pg.411]    [Pg.566]    [Pg.232]    [Pg.233]   
See also in sourсe #XX -- [ Pg.351 , Pg.352 ]




SEARCH



Schematic Diagram of a Typical R-F Sputtering System

Schematic Layout of a Pulsed Laser Deposition System

Schematic diagram of experimental system

Schematic diagram of the consecutive, simultaneous, exhaustive procedure for statistical decision-making in a multi-channel microwave-monitoring system

© 2024 chempedia.info