Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Sample preparation, generally multiple steps

Widget SPC generally provides a direct measure of the manufactured piece. Color SPC generally requires further sample preparation prior to measurement.The AIAG s translation of gage R R falls short of addressing the full scope of color measurement R R because of the multiplicity in the shear number of steps required to produce color readings. [Pg.384]

In the analytical procedure, an accurately measured aliquot of the product is diluted Avith a diluent (normally the mobile phase) and the resulting sample solution is injected into the HPLC. Because the majority of injectable pharmaceuticals are clear solutions, typically a simple dilution step is all that is needed for sample preparation. However, if the parenteral product is an emulsion or a suspension, appropriate steps must be taken to dissolve the product to achieve a clear solution (ultrasonication, filtration, etc.). For the assay procedure, the sample concentration chosen should be such that the peak areas obtained from multiple injections from the same sample are reproducible with minimum variance (<2% relative standard deviation). Peak shape and retention time also play important roles in the precision of the assay. A tailing factor less than 1.5 and a capacity factor less than 10 for the active peak are generally required for a good analytical method. A reference standard solution having the same concentration and using the same diluent as the sample solution is prepared. [Pg.276]


See other pages where Sample preparation, generally multiple steps is mentioned: [Pg.784]    [Pg.69]    [Pg.140]    [Pg.69]    [Pg.543]    [Pg.14]    [Pg.389]    [Pg.333]    [Pg.315]    [Pg.356]    [Pg.392]    [Pg.565]    [Pg.308]    [Pg.247]    [Pg.269]    [Pg.166]    [Pg.507]   
See also in sourсe #XX -- [ Pg.9 ]




SEARCH



Sample preparation, general

Sampling steps

© 2024 chempedia.info