Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cycloadditions reactivity

Table 5.8 summarizes the glycals that had been converted into 2-aminoglycosides so far. In general, photolytic ds/trans isomerization of trans-azodicarboxylates is necessary to accomplish good yields of the initial cycloadducts [335-337]. However, bis-trichloroethyl azodicarboxylate also reacts under thermal conditions and also gives a more reactive cycloaddition product [338,339]. [Pg.435]

Malpass, 1977). Diels-Alder type [2 + 4]-cycloadditions are possible with certain hetero-"ene components (J.R. Malpass, 1977 S.F. Martin, 1980) or with highly reactive o-quinodimethanes as diene components (W. Oppoizer, I978A). [Pg.153]

The TT-allylpalladium complexes 241 formed from the ally carbonates 240 bearing an anion-stabilizing EWG are converted into the Pd complexes of TMM (trimethylenemethane) as reactive, dipolar intermediates 242 by intramolecular deprotonation with the alkoxide anion, and undergo [3 + 2] cycloaddition to give five-membered ring compounds 244 by Michael addition to an electron-deficient double bond and subsequent intramolecular allylation of the generated carbanion 243. This cycloaddition proceeds under neutral conditions, yielding the functionalized methylenecyclopentanes 244[148], The syn-... [Pg.322]

A ver promising reactivity of A-2-thiazoline-4-one has been found recently. 5-Aryl-A-2-thiazoline-4-one (190) gives the 1.3-dipolar cycloaddition product (191) with methyl fumarate and methyl maleate... [Pg.425]

Reactivity involving the mesoionic protomer has been investigated very recently (562). It was known that fixed mesoionic structures undergo cycloaddition with various dipolarophiles (473) and that such a reactivity Ph. [Pg.435]

Hydroxy-THISs react with electron-deficient alkynes to give nonisol-able adducts that extrude carbonyl sulfide, affording pyrroles (23). Compound 16 (X = 0) seems particularly reactive (Scheme 16) (25). The cycloaddition to benzyne yields isoindoles in low- yield. Further cyclo-addition between isoindole and benzyne leads to an iminoanthracene as the main product (Scheme 17). The cycloadducts derived from electron-deficient alkenes are stable (23, 25) unless highly strained. Thus the two adducts, 18a (R = H, R = COOMe) and 18b (R = COOMe, R = H), formed from 7, both extrude furan and COS under the reaction conditions producing the pyrroles (19. R = H or COOMe) (Scheme 18). Similarly, the cycloadduct formed between 16 (X = 0) and dimethylfumarate... [Pg.9]

The simplest of all Diels-Alder reactions cycloaddition of ethylene to 1 3 butadi ene does not proceed readily It has a high activation energy and a low reaction rate Substituents such as C=0 or C=N however when directly attached to the double bond of the dienophile increase its reactivity and compounds of this type give high yields of Diels-Alder adducts at modest temperatures... [Pg.409]

Vinylboranes are interesting dienophiles in the Diels-Alder reaction. Alkenylboronic esters show moderate reactivity and give mixtures of exo and endo adducts with cyclopentadiene and 1,3-cyclohexadiene (441). Dichloroalkenylboranes are more reactive and dialkylalkenylboranes react even at room temperature (442—444). Dialkylalkenylboranes are omniphilic dienophiles insensitive to diene substitution (444). In situ formation of vinyl-boranes by transmetaHation of bromodialkylboranes with vinyl tri alkyl tin compounds makes possible a one-pot reaction, avoiding isolation of the intermediate vinylboranes (443). Other cycloadditions of alkenyl- and alkynylboranes are known (445). [Pg.321]

Isocyanates are Hquids or soHds which are highly reactive and undergo addition reactions across the C=N double bond of the NCO group. Reactions with alcohols, carboxyUc acids, and amines have been widely exploited ia developiag a variety of commercial products. Cycloaddition reactions involving both the C=N and the C=0 double bond of the NCO group have been extensively studied and used for product development (1 9). [Pg.446]

The chemistry of ketenes is dominated by their high reactivity most of them are not stable under normal conditions, many exist only as transient Species. Nucleophilic attack at the j -carbon, [2 + 2] cycloadditions, and ketene iasertion iato single bonds are the most important and widely used reactions of such compounds. [Pg.473]

A shippable but somewhat less reactive form of diketene is its acetone adduct, 2,2,6-trimethyl-4JT-l,3-dioxin-4-one (15) (103,104). Thermolysis of this safer to handle compound provides acetylketene, a reactive intermediate that can be used for acetoacetylation and cycloaddition reactions. The diketene—acetone adduct as weH as / fZ-butylaceto acetate [1694-31 -1] (also used for aceto acetylations by the trans aceto acetylation reaction) (130), are offered commercially. [Pg.479]

Methacryhc acid and its ester derivatives are Ctfjy -unsaturated carbonyl compounds and exhibit the reactivity typical of this class of compounds, ie, Michael and Michael-type conjugate addition reactions and a variety of cycloaddition and related reactions. Although less reactive than the corresponding acrylates as the result of the electron-donating effect and the steric hindrance of the a-methyl group, methacrylates readily undergo a wide variety of reactions and are valuable intermediates in many synthetic procedures. [Pg.246]

Polymerization by Gycloaddition. Bisimides and oligoimides capped with reactive unsaturations such as maleimide, acetylene, and xylylene groups, can be chain-extended by a cycloaddition reaction with proper bisdienes. [Pg.403]

The trans isomer is more reactive than the cis isomer ia 1,2-addition reactions (5). The cis and trans isomers also undergo ben2yne, C H, cycloaddition (6). The isomers dimerize to tetrachlorobutene ia the presence of organic peroxides. Photolysis of each isomer produces a different excited state (7,8). Oxidation of 1,2-dichloroethylene ia the presence of a free-radical iaitiator or concentrated sulfuric acid produces the corresponding epoxide [60336-63-2] which then rearranges to form chloroacetyl chloride [79-04-9] (9). [Pg.20]

In 1959 Carboni and Lindsay first reported the cycloaddition reaction between 1,2,4,5-tetrazines and alkynes or alkenes (59JA4342) and this reaction type has become a useful synthetic approach to pyridazines. In general, the reaction proceeds between 1,2,4,5-tetrazines with strongly electrophilic substituents at positions 3 and 6 (alkoxycarbonyl, carboxamido, trifluoromethyl, aryl, heteroaryl, etc.) and a variety of alkenes and alkynes, enol ethers, ketene acetals, enol esters, enamines (78HC(33)1073) or even with aldehydes and ketones (79JOC629). With alkenes 1,4-dihydropyridazines (172) are first formed, which in most cases are not isolated but are oxidized further to pyridazines (173). These are obtained directly from alkynes which are, however, less reactive in these cycloaddition reactions. In general, the overall reaction which is presented in Scheme 96 is strongly... [Pg.50]

Furan has the greater reactivity in cycloaddition reactions compared with pyrrole and thiophene the latter is the least reactive diene. However, A -substituted pyrroles show enhanced dienic character compared with the parent heterocycle. [Pg.64]

Benzo[Z)]furans and indoles do not take part in Diels-Alder reactions but 2-vinyl-benzo[Z)]furan and 2- and 3-vinylindoles give adducts involving the exocyclic double bond. In contrast, the benzo[c]-fused heterocycles function as highly reactive dienes in [4 + 2] cycloaddition reactions. Thus benzo[c]furan, isoindole (benzo[c]pyrrole) and benzo[c]thiophene all yield Diels-Alder adducts (137) with maleic anhydride. Adducts of this type are used to characterize these unstable molecules and in a similar way benzo[c]selenophene, which polymerizes on attempted isolation, was characterized by formation of an adduct with tetracyanoethylene (76JA867). [Pg.67]

As the sp nitrogen atom in many heterocycles can be alkylated and aminated, the construction of an azomethine ylide or azomethine imine dipole is readily attainable as shown in Scheme 13. These ylides are very reactive and undergo cycloaddition with a... [Pg.149]

Small unsaturated rings are usually very reactive undergoing ring opening in a number of ways, and this characteristic has been utilized in heterocyclic synthesis. In their role as dienophiles or dipolarophiles, the initial cycloaddition is usually followed by a valence tautomerism resulting in a six-membered or larger ring system. Several examples exist, however, where this does not occur, and these are described below. [Pg.153]

In this section, reactivity studies will be emphasized while in those devoted to synthesis (Section 4.04.3) theoretical calculations on reactions leading to the formation of pyrazoles (mainly 1,3-dipolar cycloadditions) will be discussed. It should be emphasized that the theoretical treatment of reactivity is a very complicated problem and for this reason, most of the calculations have been carried out on aromatic compounds, as they are the easiest to handle. In general, solvents are not taken into account thus, at the best, the situation described theoretically corresponds to reactions taking place in the gas phase. [Pg.171]

Nitrile A-oxides, under reaction conditions used for the synthesis of isoxazoles, display four types of reactivity 1,3-cycloaddition 1,3-addition nucleophilic addition and dimerization. The first can give isoxazolines and isoxazoles directly. The second involves the nucleophilic addition of substrates to nitrile A-oxides and can give isoxazolines and isoxazoles indirectly. The third is the nucleophilic addition of undesirable nucleophiles to nitrile A-oxides and can be minimized or even eliminated by the proper selection of substrates and reaction conditions. The fourth is an undesirable side reaction which can often be avoided by generating the nitrile A-oxide in situ and by keeping its concentration low and by using a reactive acceptor (70E1169). [Pg.66]

Concerted cycloadditions are observed with heterocyclics of all ring sizes. The heterocycles can react directly, or via a valence tautomer, and they can utilize all or just a part of unsaturated moieties in their rings. With three-membered rings, ylides are common reactive valence tautomers. Open chain 47T-systems are observed as intermediates with four-membered rings, and bicyclic valence tautomers are commonly reactive species in additions by large rings. Very often these reactive valence tautomers are formed under orbital symmetry control, both by thermal and by photochemical routes. [Pg.26]

Diene moieties, reactive in [2 + 4] additions, can be formed from benzazetines by ring opening to azaxylylenes (Section 5.09.4.2.3). 3,4-Bis(trifluoromethyl)-l,2-dithietene is in equilibrium with hexafluorobutane-2,3-dithione, which adds alkenes to form 2,3-bis-(trifluoromethyl)-l,4-dithiins (Scheme 17 Section 5.15.2.4.6). Systems with more than two conjugated double bonds can react by [6ir + 2ir] processes, which in azepines can compete with the [47t + 27t] reaction (Scheme 18 Section 5.16.3.8.1). Oxepins prefer to react as 47t components, through their oxanorcaradiene isomer, in which the 47r-system is nearly planar (Section 5.17.2.2.5). Thiepins behave similarly (Section 5.17.2.4.4). Nonaromatic heteronins also react in orbital symmetry-controlled [4 + 2] and [8 + 2] cycloadditions (Scheme 19 Section 5.20.3.2.2). [Pg.27]

It was not their reactivity but their chemical inertness that was the true surprise when diazirines were discovered in 1960. Thus they are in marked contrast to the known linear diazo compounds which are characterized by the multiplicity of their reactions. For example, cycloadditions were never observed with the diazirines. Especially surprising is the inertness of diazirines towards electrophiles. Strong oxidants used in their synthesis like dichromate, bromine, chlorine or hypochlorite are without action on diazirines. Diazirine formation may even proceed by oxidative dealkylation of a diaziridine nitrogen in (186) without destruction of the diazirine ring (75ZOR2221). The diazirine ring is inert towards ozone simple diazirines are decomposed only by more than 80% sulfuric acid (B-67MI50800). [Pg.220]

Extrapolation from the known reactivity of cyclobutadiene would suggest that azetes should be highly reactive towards dimerization and as dienes and dienophiles in cycloaddition reactions and the presence of a polar C=N should impart additional reactivity towards attack by nucleophiles. Isolation of formal dimers of azetes has been claimed as evidence for the intermediacy of such species, but no clear reports of their interception in inter-molecular cycloaddition reactions or by nucleophiles have yet appeared. [Pg.279]


See other pages where Cycloadditions reactivity is mentioned: [Pg.188]    [Pg.207]    [Pg.188]    [Pg.207]    [Pg.306]    [Pg.311]    [Pg.521]    [Pg.164]    [Pg.157]    [Pg.69]    [Pg.70]    [Pg.240]    [Pg.4]    [Pg.174]    [Pg.64]    [Pg.64]    [Pg.86]    [Pg.133]    [Pg.66]    [Pg.109]    [Pg.53]    [Pg.53]    [Pg.53]    [Pg.261]    [Pg.276]    [Pg.279]   
See also in sourсe #XX -- [ Pg.44 , Pg.87 , Pg.88 , Pg.89 ]




SEARCH



1,3-dipolar cycloaddition reactions reactivity

Alkenes reactivity in cycloaddition reactions

Cycloaddition reactions reactivity

Cycloadditions vinylogous reactivity

General reactivity intermolecular cycloadditions

General reactivity intramolecular cycloadditions

Intramolecular cycloadditions reactivity

Reactivity in 2 + 2 cycloadditions

Relative reactivity cycloadditions

Relative reactivity, nitrile oxide cycloadditions

Relative reactivity, nitrile oxide cycloadditions relativity

© 2024 chempedia.info