Reactions in Batch Reactors

Chapter 2 developed a methodology for treating multiple and complex reactions in batch reactors. The methodology is now applied to piston flow reactors. Chapter 3 also generalizes the design equations for piston flow beyond the simple case of constant density and constant velocity. The key assumption of piston flow remains intact there must be complete mixing in the direction perpendicular to flow and no mixing in the direction of flow. The fluid density and reactor cross section are allowed to vary. The pressure drop in the reactor is calculated. Transpiration is briefly considered. Scaleup and scaledown techniques for tubular reactors are developed in some detail. 

ATR-IR spectroscopy can be used as a spy inside a reactor for on-line monitoring and control of a reaction. The emphasis in this kind of application of ATR spectroscopy is on the detection of reactants and products in the bulk fluid phase. Such applications benefit from the excellent time resolution of FTIR instruments compared to other analytical tools, such as chromatographs. The method can be used in investigations of kinetics of reactions in batch reactors instrumentation has been developed and even commercialized that allows measurements at elevated temperatures and pressures. 

F. Caccavale, M. Iamarino, F. Pieni, and V. Tufano. An adaptive controller-observer scheme for temperature control of non-chain reactions in batch reactors. International Journal of Adaptive Control and Signal Processing, 22 627-651, 2008. 

---