Pyrolysis porosity reduction

As already mentioned, the first pyrolysis cycle leads to an open porosity of about 20-30 %. This high porosity limits the interlaminar shear strength (ILS). A reduction in the porosity is possible by reimpregnation with polymers and subsequent pyrolysis or CVI (Chemical Vapour Infiltration). 

Titania-supported vanadia catalysts have been widely used in the selective catalytic reduction (SCR) of nitric oxide by ammonia (1, 2). In an attempt to improve the catalytic performance, many researchers in recent years have used different preparation methods to examine the structure-activity relationship in this system. For example, Ozkan et al (3) used different temperature-programmed methods to obtain vanadia particles exposing different crystal planes to study the effect of crystal morphology. Nickl et al (4) deposited vanadia on titania by the vapor deposition of vanadyl alkoxide instead of the conventional impregnation technique. Other workers have focused on the synthesis of titania by alternative methods in attempts to increase the surface area or improve its porosity. Ciambelli et al (5) used laser-activated pyrolysis to produce non-porous titania powders in the anatase phase with high specific surface area and uniform particle size. Solar et al have stabilized titania by depositing it onto silica (6). In fact, the new SCR catalyst developed by W. R. Grace Co.-Conn., SYNOX , is based on a titania/silica support (7). 

---