Pt-, Pd-based catalysts

Platinum-based catalysts are widely used in low-temperature fuel cells, so that up to 40% of the elementary fuel cell cost may come from platinum, making fuel cells expensive. The most electroreactive fuel is, of course, hydrogen, as in an acidic medium. Nickel-based compounds were used as catalysts in order to replace platinum for the electrochemical oxidation of hydrogen [66, 67]. Raney Ni catalysts appeared among the most active non-noble metals for the anode reaction in gas diffusion electrodes. However, the catalytic activity and stability of Raney Ni alone as a base metal for this reaction are limited. Indeed, Kiros and Schwartz [67] carried out durability tests with Ni and Pt-Pd gas diffusion electrodes in 6 M KOH medium and showed increased stability for the Pt-Pd-based catalysts compared with Raney Ni at a constant load of 100 mA cm and at temperatures close to 60 °C. Moreover, higher activity and stability could be achieved by doping Ni-Al alloys with a few percent of transition metals, such as Ti, Cr, Fe and Mo [68-70]. 

Koyer-GoUcowska A, Musialrk-Piotrowska A, Rutkowski J. Oxidation of Chlorinated Hydrocarbons over Pt-Pd-based Catalyst Part 1. Chlorinated Methanes. Catal Today 2004 90 133-138. 

---