Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polysulfone PSF

Note Glass filler can considerably extend the performance of the above polymers. PEI = polyetherimide PES = polyether sulfone PPS = polyphenylene sulfide PSF = polysulfone PC = polycarbonate. [Pg.392]

Figure 18.18 Map of dielectric properties of engineering plastics. Among engineering plastics, SPS (impact modified and GF-reinforced HB and IR grades) has very low dielectric dissipation factor and dielectric constant following those of fluorocarbon polymers. PSF, polysulfone PPE, poly(phenylene ether) PES, poly(ether sulfone) PAr, polyarylate... Figure 18.18 Map of dielectric properties of engineering plastics. Among engineering plastics, SPS (impact modified and GF-reinforced HB and IR grades) has very low dielectric dissipation factor and dielectric constant following those of fluorocarbon polymers. PSF, polysulfone PPE, poly(phenylene ether) PES, poly(ether sulfone) PAr, polyarylate...
Figure 9 Ultraviolet spectral absorption of 2 mil polymer films and spectral irradiance of sunlight. Abbreviations PVC, Polyvinyl chloride PE, polyethylene PS, polystyrene PC, polycarbonate AP, aromatic polyester PSF, polysulfone PET, poly(ethylene terephthalate) PAR, polyacrylate. Source From Ref. 16. Figure 9 Ultraviolet spectral absorption of 2 mil polymer films and spectral irradiance of sunlight. Abbreviations PVC, Polyvinyl chloride PE, polyethylene PS, polystyrene PC, polycarbonate AP, aromatic polyester PSF, polysulfone PET, poly(ethylene terephthalate) PAR, polyacrylate. Source From Ref. 16.
PET/PSF (polysulfone usually fiber reinforced) warp resistance, dimensional stabihty, stiffness, high temperature performance, chemical resistance. Apphcations include industrial process equipment, electrical connectors, and food processing equipment. [Pg.953]

Typical membranes prepared according to this synthesis procedure have chito-san, PVA (polyvinylalcohol), PPO (polyphenylene oxide), PDMS (polydimethyl si-loxane) or Nation top-layers. Typical support layers are made of PAN (polyacrylonitrile), PI (polyimide), PVDF (polyvinylidenedifluoride) or PSf (polysulfone). [Pg.261]

Figure 8.2. Ultraviolet absorption spectra of 0.05-mm polymer films and spectral irra-diance of July noon sunlight (direct beam) at 41°N latitude AP = aromatic polyester PAR = polyarylate PC = polycarbonate PE = polyethylene PET = poly(ethylene tere-phthalate) PS = polystyrene PSF = polysulfone PVC = poly(vinyl chloride). (Reprinted with permission of Technomic Publishing Co. [4].)... Figure 8.2. Ultraviolet absorption spectra of 0.05-mm polymer films and spectral irra-diance of July noon sunlight (direct beam) at 41°N latitude AP = aromatic polyester PAR = polyarylate PC = polycarbonate PE = polyethylene PET = poly(ethylene tere-phthalate) PS = polystyrene PSF = polysulfone PVC = poly(vinyl chloride). (Reprinted with permission of Technomic Publishing Co. [4].)...
PSF Polysulfone P-M Petrie-Marshall model PU Polyurethane PVAc Polyvinyl acetate PVC Polyvinyl chloride PVDF Polyvinylidenefluoride PVME Poly(vinyl methyl ether)... [Pg.1390]

PBT Polybutylene terephthalate PC Polycarbonate PCL Poly-caprolactone PE Polyethylene PEI Polyether imide PES Polyether sulfide PET Polyethylene terephthalate PHA Polyhydroxy alkanoate PHB Polyhydroxy butyrate PLA Poly-lactic acid PMMA Polymethyl methacrylate PP Polypropylene PPE Polyphenylene ether PPO Polyphenylene oxide PPS Polyphenylene sulfide PS Polystyrene PSF Polysulfone... [Pg.1455]

PSF Polysulfone of bisphenol-A Udel Union Carbide Corp./ Amoco... [Pg.2358]

Table 14.4. Liquid surface tension, /iv, at which maximum (Max) or minimum (Min) in sedimentation volume occurs, for several polymers PTFE, polytetrafluoroethylene PVDF, poly(vinylidene fluoride) PVF, poly(vinyl fluoride) HOPE high-density polyethylene PA 66, poly(hexamethylene adipamide) (nylon 6, 6) PSF, polysulfonate. Experiments were performed at room temperature, and the extrema are to be understood as being the surface tensions of the polymers (from refs (65, 66)) ... [Pg.271]

See other pages where Polysulfone PSF is mentioned: [Pg.3]    [Pg.124]    [Pg.40]    [Pg.814]    [Pg.150]    [Pg.495]    [Pg.336]    [Pg.129]    [Pg.252]    [Pg.253]    [Pg.835]    [Pg.42]    [Pg.1160]    [Pg.319]    [Pg.129]    [Pg.31]    [Pg.20]    [Pg.933]    [Pg.484]    [Pg.353]    [Pg.208]    [Pg.933]    [Pg.195]    [Pg.489]    [Pg.222]    [Pg.185]    [Pg.507]    [Pg.856]    [Pg.1481]    [Pg.1634]    [Pg.119]    [Pg.406]    [Pg.701]    [Pg.351]    [Pg.919]    [Pg.366]    [Pg.5]    [Pg.279]    [Pg.34]   
See also in sourсe #XX -- [ Pg.562 ]



SEARCH



Polysulfones

© 2024 chempedia.info