Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polythionic Acid Cracking

Wdded assemblies must be heat treated at 1,650 F (900 C) for 4 h after completion in order to prevent polythionic acid cracking during downtime. [Pg.151]

Polythionic Acid Cracking Test Caustic Solution Cracking Tests Custom Process Solution Testing G35... [Pg.140]

Ammonia causes admiralty lubes to crack Chlorides initiate stainless steel failures Stainless U-tube bends vulnerable to cracking Polythionic acid cracking during turnarounds... [Pg.208]

Polysulfide wash, 93 Polythionic acid cracking, 425-426 Polytropic compressor efficiency,... [Pg.265]

The 300 series stainless steels—especially Type 304 (18-8)—are susceptible to rapid cracking by polythionic acid. Polythionic acid cracking is a... [Pg.474]

NACE Standard RP0170, Protection of Austenitic Stainless Steel from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment," NACE, Houston, TX, latest revision. [Pg.55]

Beggs, D.V., and R.W. Howe. 1993. Effects of Welding and Thermal Stabilization on the Sensitization and Polythionic Acid Stress Corrosion Cracking of Heat and Corrosion-Resistant Alloys. CORRO-SION/93, Paper No. 541. Houston, TX NACE International. [Pg.1595]

H.H. Horowitz, Chemical Studies of Polythionic Acid Stress-Corrosion Cracking, Corros. Sci., Vol 23, 1983, p 353-362... [Pg.447]

Cracking of Sensitized Austenitic Alloys in Polythionic Acids... [Pg.359]

See ASTM G 35, Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress Corrosion Cracking in Polythionic Acids. [Pg.295]

Though nickel alloys are more resistant to chloride and caustic SCC than stainless steels, they are equally susceptible to cracking in polythionic acid (PTA) when in the sensitized condition. See ASTM G 35, Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress Corrosion Cracking in Polythioiuc Acids, for test details. [Pg.583]

ASTM Standard Recommended Practice G35, Determining the susceptibility of stainless steels and related nickel-chromium-iron alloys to stress corrosion cracking in polythionic acids. [Pg.795]

See other pages where Polythionic Acid Cracking is mentioned: [Pg.474]    [Pg.26]    [Pg.474]    [Pg.26]    [Pg.204]    [Pg.1215]    [Pg.20]    [Pg.1101]    [Pg.38]    [Pg.75]    [Pg.382]    [Pg.34]    [Pg.1108]    [Pg.1565]    [Pg.1566]    [Pg.1573]    [Pg.1574]    [Pg.1574]    [Pg.1591]    [Pg.385]    [Pg.1111]    [Pg.291]    [Pg.291]    [Pg.34]    [Pg.49]    [Pg.1130]    [Pg.359]    [Pg.360]    [Pg.360]    [Pg.360]    [Pg.143]    [Pg.249]    [Pg.604]    [Pg.820]    [Pg.853]   


SEARCH



Polythionate

Polythionates

Polythionic acids

© 2024 chempedia.info