Polyetheresters

Apostolov A.A. and Fakirov S., Effect of the length on the deformation behaviour of polyetheresters as revealed by smah angle x-ray scattering, J. Macromol. Set, Phys. B, 31, 329, 1992. [Pg.161]

Yang, L. and Klang, J., Process for making a polyetherester by insertion of a carboxylic acid into a polyether, US Patent 5 569 737, 1996. [Pg.730]

Yang, L., Klang, J. and Cai, G., Process for making polyetheresters with high aromatic ester content, US Patent 5 612 444, 1997. [Pg.730]

Yang, L. and Johnson, K., Cured thermosets and glass-reinforced composites from unsaturated polyetherester resins, US Patent 5 684 086, 1997. [Pg.730]

Hsu, C., Zhao, M. and Bergstrom, L., Aromatic polyol end-capped unsaturated polyetherester resins and resin compositions containing the same... [Pg.730]

Other important thermoplastic elastomers are the multiblock polyetheresters (trade names Hytrel, Lomod) and polyetheramides (trade names Pebax, Estamid, Grilamid). [Pg.143]

Polyetherester. These thermoplastic elastomers are typically block copolymers of polyoxybutylene rubber with polybutylene terephthalate crystalline domains. [Pg.655]

In this paper the relative importance of photolysis and photo-oxidation during weathering of the above mentioned engineering plastics as well as two polyetherester copolymers will be discussed. [Pg.314]

The PA6, PBT and the two polyetherester copolymers were aged in closed boro-silicate vessels filled with air or nitrogen. The PC was weathered as a free standing film. [Pg.316]

PPS with a styrene-grafted PPE and polyetherester rubber good toughness, impact and tensile strength Dainippon Ink Chem., Inc., 1982... [Pg.79]

Yang, L. and Johnson, K., Cured thermosets and glass-reinforced composites from unsaturated polyetherester resins, US Patent 5 684 086, 1997. Hsu, C., Zhao, M. and Bergstrom, L., Aromatic polyol end-capped unsaturated polyetherester resins and resin compositions containing the same... [Pg.730]

Goedemoed JH, Hennink WE. Polyetherester copolymers as drug dehvery matrices. US patent 5980948, 1999. [Pg.246]

Styrene-butadiene-styrene (SBS) Styrene-ethylene-butadiene-styrene (SEBS) Ethylene-vinyl acetate/polyvinylidene chloride (EVA/PVDC) Thermoplastic polyurethane (TPU) Polyetherblock polyamide (PEBA) Copolyester, Polyetherester (TEEE) Polypropylene/ethylene- propylene terpolymers (PP-EPDM) Polypropylene/nitrile rubber (PP-NBR)... [Pg.72]

First, one tests for the components of the TPE according to the procedures described in the preceding sections (testing for double bonds in EPDM or butadiene components, see preceding paragraphs polyolefins, see Section 6.2.1 styrene polymers, see Section 6.2.2 ethylene/vinyl acetate copolymers, see Section 6.2.5 polyurethanes, see Section 6.2.11 polyamides, see Section 6.2.10 terephthalic acid in polyetheresters, see Section 6.2.15). [Pg.72]

The hard and soft blocks structure also contributes to their performance characteristics. The soft segment may consist of polyester, polyether, or polyetherester chains. Polyether chains provide better low-temperature properties and resistance to hydrolysis, whereas, polyester chains provide better fluid resistance and resistance to oxidation at elevated temperatures. [Pg.511]

Most compounders use a combination of physical and chemical antiozonants and achieve excellent protection in this way. For more severe ozone-resistance problems, there are, of course, a number of specialty elastomers that are saturated and therefore completely ozone-resistant ethylene/propylene rubber, chlorinated and chlorosulfonated polyethylene, ethylene/vinyl acetate, ethylene/acrylic esters, butyl rubber, SEES, plasticized PVC, butyl acrylate copolymers, polyepichlorohydrin and copolymers, polyetherester block copolymer, polyurethane, and silicone. [Pg.322]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...