Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Poly pentene

The dual function of the precatalysts 4 opened the way to well-controlled block polymerization of ethylene and MMA (eq. (5)) [89, 90]. Homopolymerization of ethylene (Mn = 10000) and subsequent copolymerization with MAA (Mn 20000) yielded the desired linear AB block copolymers. Mono and bis(alkyl/silyl)-substituted flyover metallocene hydride complexes of type 8 gave the first well-controlled block copoymerization of higher a-olefins with polar monomers such as MMA or CL [91]. In contast to the rapid formation of polyethylene [92], the polymerization of 1-pentene and 1-hexene proceeded rather slowly. For example, AB block copolymers featuring poly( 1-pentene) blocks (M 14000, PDI = 1.41) and polar PMMA blocks (M 34000, PDI = 1.77) were obtained. Due to the bis-initiating action of samarocene(II) complexes (Scheme 4), type 13-15 precatalysts are capable of producing ABA block copolymers of type poly(MMA-co-ethylene-co-MMA), poly(CL-co-ethylene-co-CL), and poly(DTC-co-ethylene-co-DTC DTC = 2,2-dimethyltrimethylene carbonate) [90]. [Pg.988]

Syndiotactic poly( 1-pentene), poly(l-hexene), and poly( 1-octene) have been described.936... [Pg.1080]

The Tc- and Tm2-values of these poly(1-olefin)s are plotted in Figure 1.15 as a function of the number of C-atoms in the side-chain. Besides, Tm- and Tc-values of the main-chain crystalline phases as present in polypropylene (PP), poly 1-butene (P1B) and poly 1-pentene (PIP) ... [Pg.38]

Representative poly( 1-pentene) tacticity data is provided in Table 4.4 representative polypropylene tacticity data is provided in Table 4.2. Poly(pentene) was produced using neat 1-pentene poly(propylene) was produced using neat propylene or a 50/50 (v/v) mixture with toluene. These scandocenes and yttrocenes provide atactic polymers. The tacticity values range from [r] = 28.62% to [r] = 52.12% for poly( 1-pentene) samples, and from [r] = 48.77% to [r] = 61.13% for poly(propylene) samples. Within experimental error, polymerization temperature and monomer dilution appear to exert a minimal effect on polymer tacticity. [Pg.123]


See other pages where Poly pentene is mentioned: [Pg.949]    [Pg.355]    [Pg.238]    [Pg.256]    [Pg.262]    [Pg.93]    [Pg.147]    [Pg.841]    [Pg.841]    [Pg.903]    [Pg.118]    [Pg.349]    [Pg.72]    [Pg.87]    [Pg.2347]    [Pg.294]    [Pg.974]    [Pg.1471]    [Pg.1525]    [Pg.1644]    [Pg.1774]    [Pg.2223]   
See also in sourсe #XX -- [ Pg.38 , Pg.238 , Pg.256 , Pg.262 , Pg.292 ]




SEARCH



Poly(4-methyl pentene

Poly(4-methyl pentene Density

Poly(4-methyl pentene conformation

Poly(4-methyl pentene isotactic

Poly(4-methyl pentene structure

Poly(4-methyl-1 -pentene) PMP

Poly-l-pentene

© 2024 chempedia.info