Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Poly fatigue testing

Almaraz GMD, Gomez EC, Zeidan FMA, Mena ERM. Ultrasonic fatigue testing on poly-... [Pg.86]

Fig. 5.61 Dependence of failure stress of a variety of engineering polymers upon the number of cycles accumulated during a dynamic fatigue test at 2(fC. The polymers used were poly (methyl methacrylate) (PMMA), rigid poly (vinyl chloride) (PVC) and an acrylonitrile-butadiene-styrene copolymer (ABS). (After Bucknall, Gotham and Vincent Chapter 10 in Polymer Sciencey ed. Jenkinsy North-Holland, 1972.)... Fig. 5.61 Dependence of failure stress of a variety of engineering polymers upon the number of cycles accumulated during a dynamic fatigue test at 2(fC. The polymers used were poly (methyl methacrylate) (PMMA), rigid poly (vinyl chloride) (PVC) and an acrylonitrile-butadiene-styrene copolymer (ABS). (After Bucknall, Gotham and Vincent Chapter 10 in Polymer Sciencey ed. Jenkinsy North-Holland, 1972.)...
Fig. 4.85 Fatigue curves for poly(vinyl chloride) using specimens with and without three mm hole as stress concentrator tested at room temperature in the alternating tensile range (Jtai [06Oss]. Fig. 4.85 Fatigue curves for poly(vinyl chloride) using specimens with and without three mm hole as stress concentrator tested at room temperature in the alternating tensile range (Jtai [06Oss].
Figure 15.11 Fatigue curves (stress amplitude versus the number of cycles to failure) for poly(ethylene terephthalate) (PET), nylon, polystyrene (PS), poly(methyl methacrylate) (PMMA), polypropylene (PP), polyethylene (PE), and polytetrafluoroethylene (PTFE). The testing frequency was 30 Hz. Figure 15.11 Fatigue curves (stress amplitude versus the number of cycles to failure) for poly(ethylene terephthalate) (PET), nylon, polystyrene (PS), poly(methyl methacrylate) (PMMA), polypropylene (PP), polyethylene (PE), and polytetrafluoroethylene (PTFE). The testing frequency was 30 Hz.
El Fray M and Altstadt V (2003) Fatigue behaviour of multiblock thermoplastic elastomers. 1. Stepwise increasing load testing of poly(aliphatic/aromatic-ester) copolymers, Polymer 44 4635-4642. [Pg.116]

See other pages where Poly fatigue testing is mentioned: [Pg.536]    [Pg.456]    [Pg.315]    [Pg.339]    [Pg.89]    [Pg.67]    [Pg.200]    [Pg.79]    [Pg.282]    [Pg.365]    [Pg.255]    [Pg.297]    [Pg.632]    [Pg.371]    [Pg.534]    [Pg.3071]    [Pg.244]    [Pg.216]    [Pg.74]    [Pg.581]    [Pg.277]    [Pg.440]    [Pg.1112]    [Pg.1344]    [Pg.425]   


SEARCH



Fatigue tests

Poly fatigue

© 2024 chempedia.info