PEDOT structure

Vapor-phase polymerization has been used to create a PEDOT structure into which even delicate biomolecules such as enzymes can be incorporated during the subsequent washing step.37... 

Fabrication methods for 1-D PEDOT structures such as nanorod, tube and wire have been proposed via various synthetic routes microemulsion polymerization, template synthesis, electrochemical polymerization, and so forth. In the case of the template synthesis, various commercial templates were produced and available currently such as track-etched PC and AAO membranes, and mesoporous sihca. 

LAJs incorporating polymer films on top of the organic SAMs showed that these junctions allow for studying the correlation between electrical properties and chemical structure. Both de Boer et al. [80] (Fig. 7) and Rampi et al. [79], by spin-coating respectively PEDOT PSS and PPV on top of alkane SAMs, extracted from the electrical measurement [i = 0.57 A-1 and [j = 0.90 A-1. Rampi et al. also showed that it is possible to measure electrical properties of polyphenyl chains with a [1 0.61 A, and that the PPV polymer layer is much more conductive that... 

Same as arylamine DSA derivatives used as guest materials in blue OLEDs, Geise et al. synthesized a series of alkyloxy-substituted biphenyl vinyl compounds as dopant materials [236]. These authors studied OLEDs fabricated using PVK as a host polymer and holetransporting PBD as a codopant with a PLED structure of ITO/PEDOT-PSS/PVK 230VBP PBD/LiF/Al, which gave an optimized QE of 0.7% and brightness of 1600 cd/m2 at 100 mA/cm2 with emission peak at 450 nm. 

FIGURE 4. (a) Structures of PPVG and PEDOT PSS. (b) The fabricating of the polyelectrolyte-organometallic multilayer film by the layer-by-layer deposition process. 

Device structure ITO/PEDOT PSS/polymer(Pl—P3)/BCP/Alq3/LiF/Al, where the polymer (PI—P3) is an emitting layer. bVoa is the turn-on voltage. 

---