Partial reconfiguration

The previously reconfigured munitions (no fuzes) and the partially reconfigured munitions (as described above, with fuzes) are moved into an explosive containment room, where nose plugs, fuzes, boosters, and bursters are removed by the LPMD machine robot. The empty burster well is sampled to determine if a leak has occurred if no leak has occurred, the bursters and fuzes will be shipped offsite to a conunercial TSDF. If a leak has occurred in the burster well, the munitions are overpacked for treatment by the EDT.- Munitions that cannot be processed successfully by the LPMD machine robot—that is, rejects—will be containerized and treated by the EDT. 

Table 4.7 Partial reconfiguration time for SRAM-based FPGA (Vttlex 4 xc4vlx80- 12fril48) 51...

Table 7.2 Fault injection by partial reconfiguration in SRAM-based FPGA 84...

Having thus obtained the surface isorisk maps, reconfiguration of the work areas can be carried out, possibly with partial compartmentalisation and the introduction of warning and detection systems. 

The paradigms constructed on the basis of mass, momenta, and energy streams continuity are used to quantify the macroscopic properties of fluids. Their mathematical models are represented by a set of nonlinear partial differential equations. Computer implementation of these models is based on the space and time discretization on a fixed or reconfigurable mesh. This can be accomplished by using finite elements (FEM) or finite differences (FDM) techniques. The resulting set of... 

In 1983, the first tier under accident was reconfigured as shown in Figure 18-10. The most significant change was adding potentially harmful environmental conditions to the chart. It was probably at least partially motivated... 

---