Paper hangers

Other cancers of the respiratory tract are documented also, e.g., cancer of the nasal cavity, pleural mesothelioma with high incidences in painters and paper-hangers and cancers of the larynx. ... 

In order to fit a shell with this star, place it on the shoulder of the shell and paste down the ernarginated edge. Secure it by pasting pieces of kraft paper around the base of the star. The position of the star must be near the hanger so that the shell is not caught by the inside wall of the mortar when loading or firing(Fig.Il8(2)). 

The fuses of shells are cut at the end with a knife so that they are easily ignited. At the same time inspect them to see whether the fuses are fixed firmly to the shells and repair them if necessary, by winding pasted pieces of hemp around them. Needless to say remind the workers to bring the materials and instrument for such repairs. The shells are fixed with simple hangers such as those made of paper cord. Sometimes we find a curved fuse, which-is shown in Fig.113(F). Be careful to cut it in the proper place, otherwise it causes the shell to burst low(Fig.l 6). 

Spring-loaded hanger rods, available commercially, e.g., from Fisher, can be placed inside and at the top of standard TLC tanks. Papers are clipped to the rods and dipped into solvent contained on the bottom of the tank. 

Figure 9.19 Prototypes developed for various end-use applications (a) Motorbike airfilter made up of sisal/PP composites at 30% fiber loading left side shows the front view while right side shows the back view with metallic inserts (b) Ecofriendly Garment Hangers made out of Sisal/PP composites at 20% fiber loading (c) Gas Guiding paper for offshore oil drilling for application below 100 °C made out of Banana Glass/PP hybrid composites (d) Automotive Hinge Component made of Banana Glass/PP hybrid composites.

A double tower self-anchored suspension bridge with bridge length 312 m, main span 160 m, two side spans of 76 m, tower height 42.4 m, and hanger to hanger distance of 5 m, this paper s analysis yields the following conclusions ... 

The tube la saturated with the developer vapors by Immersing a purified paper strip (see Note 1) In the mixed solvent and suspending It from the hanger for 20 minutes prior to Introduction of the sample. 

---