Packing chimney collector tray

Figure 7.4 shows a modern, narrow-trough, liquid collector-vapor distributor chimney tray. While the initial vapor distribution through a packed bed is not quite so critical or difficult as the liquid distribution, it is still important. 

Chimney trays (Fig. 4.10a, 6) are used for withdrawing intermediate liquid streams from the column in a packed tower, they are also used as liquid collectors or vapor distributors. Alternative devices used for liquid withdrawal are downcomer trapouts in tray columns, chevron collectors, and some redistributors in packed columns. Compared to these alternative devices, chimney trays have the following advantages ... 

Chevron collectors are used in packed columns as liquid collectors for partial drawoff or for feeding to a redistributor which is not selfcollecting (e.g., a notched-trough redistributor). They are sometimes also used as total drawoffs, but are less suitable than chimney trays for this purpose. The chevron collector (Fig. 4.13) consists of evenly spaced chevron blades several inches high. Liquid collects at the bottom of the blades and runs into a draw pan. From there it can be taken out or fed to a redistributor. 

---