Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Oxygen terminal oxidant

There are several available terminal oxidants for the transition metal-catalyzed epoxidation of olefins (Table 6.1). Typical oxidants compatible with most metal-based epoxidation systems are various alkyl hydroperoxides, hypochlorite, or iodo-sylbenzene. A problem associated with these oxidants is their low active oxygen content (Table 6.1), while there are further drawbacks with these oxidants from the point of view of the nature of the waste produced. Thus, from an environmental and economical perspective, molecular oxygen should be the preferred oxidant, because of its high active oxygen content and since no waste (or only water) is formed as a byproduct. One of the major limitations of the use of molecular oxygen as terminal oxidant for the formation of epoxides, however, is the poor product selectivity obtained in these processes [6]. Aerobic oxidations are often difficult to control and can sometimes result in combustion or in substrate overoxidation. In... [Pg.186]

Simultaneously with the elucidation of the tricarboxylic acid cycle was the discovery of the means by which oxygen was utilized in cells for terminal oxidation. An abortive start on this had been made by MacMunn (1886), a medical practitioner and the author of a major text on spectroscopy. In a paper for the Royal Society (1886) MacMunn had concluded ... [Pg.81]

In the development of effective catalytic oxidation systems, there is a qualitative correlation between the desirability of the net or terminal oxidant, (OX in equation 1 and DO in equation 2) and the complexity of its chemistry and the difficulty of its use. The desirability of an oxidant is inversely proportional to its cost and directly proportional to the selectivity, rate, and stability of the associated oxidation reaction. The weight % of active oxygen, ease of deployment, and environmental friendliness of the oxidant are also key issues. Pertinent data for representative oxidants are summarized in Table I (4). The most desirable oxidant, in principle, but the one with the most complex chemistry, is O2. The radical chain or autoxidation chemistry inherent in 02-based organic oxidations, whether it is mediated by redox active transition metal ions, nonmetal species, metal oxide surfaces, or other species, is fascinatingly complex and represents nearly a field unto itself (7,75). Although initiation, termination, hydroperoxide breakdown, concentration dependent inhibition... [Pg.69]

Beyer and coworkers later extended these reactions to platinum clusters Ptn and have demonstrated that similar reaction sequences for the oxidation of carbon monoxide can occur with larger clusters [70]. In addition, they were able to demonstrate poisoning effects as a function of surface coverage and cluster size. A related sequence for Pt anions was proposed by Shi and Ervin who employed molecular oxygen rather than N2O as the oxidant [71]. Further, the group of Bohme has screened the mononuclear cations of almost the entire transition metal block for this particular kind of oxidation catalysis [72,73]. Another catalytic system has been proposed by Waters et al. in which a dimolybdate anion cluster brings about the oxidation of methanol to formaldehyde with nitromethane, however, a rather unusual terminal oxidant was employed [74]. [Pg.18]

Abstract Palladium-catalyzed oxidation reactions are among the most diverse methods available for the selective oxidation of organic molecules, and benzoquinone is one of the most widely used terminal oxidants for these reactions. Over the past decade, however, numerous reactions have been reported that utilize molecular oxygen as the sole oxidant. This chapter outlines the fundamental reactivity of benzoquinone and molecular oxygen with palladium(O) and their catalyst reoxidation mechanisms. The chemical similarities... [Pg.75]

The oxidation of sulfides is the most straightforward method for the synthesis of sulfoxides and sulfones.During recent years, very useful procedures involving aqueous hydrogen peroxide (H2O2) as the terminal oxidant are noteworthy due to the effective oxygen-content, low cost, safety in storage and operation and... [Pg.283]


See other pages where Oxygen terminal oxidant is mentioned: [Pg.287]    [Pg.31]    [Pg.34]    [Pg.186]    [Pg.187]    [Pg.201]    [Pg.206]    [Pg.222]    [Pg.98]    [Pg.640]    [Pg.76]    [Pg.151]    [Pg.178]    [Pg.180]    [Pg.57]    [Pg.203]    [Pg.222]    [Pg.891]    [Pg.54]    [Pg.233]    [Pg.261]    [Pg.220]    [Pg.408]    [Pg.34]    [Pg.37]    [Pg.42]    [Pg.48]    [Pg.356]    [Pg.743]    [Pg.352]    [Pg.309]    [Pg.442]    [Pg.449]    [Pg.189]    [Pg.74]    [Pg.13]    [Pg.78]    [Pg.276]    [Pg.309]    [Pg.442]    [Pg.449]    [Pg.124]    [Pg.136]    [Pg.10]    [Pg.292]   
See also in sourсe #XX -- [ Pg.293 ]




SEARCH



Molecular Oxygen as Terminal Oxidant

Terminal oxidant

Termination, oxidation

© 2024 chempedia.info