Ni-Pd alloy

Bozzolo G, Noebe RD, Khalil J, Morse J. 2003. Atomistic analysis of surface segregation in Ni-Pd alloys. Appl Surf Sci 219 149-157. 

Fig. 13. Energy dependence of the real (c, ) and imaginary part (e 2) of the dielectric tensor exy in Ni-Pd alloys. Filled circles alloy with 2% Pd open and filled triangles alloy with 20% Pd. (After Voloshinskaya et al. 1974.) The curves through the data points represent least-squares fittings made on the basis of...

Ni/Pd alloy bimetallic nanoclusters prepared by the improved alcohol reduction method under high temperature were applied to the catalysis for hydrogena-... 

Nakagawa Y, Tomishige K (2010) Total hydrogenation of furan derivatives over silica-supported Ni-Pd alloy catalyst. Catal Commun 12 154-156... 

W. Morke, R. Lamber, U. Schubert, and B. Breitscheidel, Metal Complexes in Inorganic Matrixes. 11. Composition of Highly Dispersed Bimetallic Ni, Pd Alloy Particles Prepared by Sol-Gel Processing Electron Microscopy and FMR Study, Chem. Mater., 6, pp. 1659-66, 1994. 

Kumar KS, Haridoss P, Seshadri SK (2008) Synthesis and characterization of electrodeposited Ni-Pd alloy electrodes for methanol oxidation. Surf Coating Technol 202 (9) 1764-1770... 

Figure 4.83 shows the CpS of Ni-Pd alloy. It should be noted that AH and AS still exist, although the magnetic transition is a second-order transition. The values of AH and AS are one or two orders of magnitude lower than those of the first-order transition. For example, AH = 0.22 kj mol and AS = 0.48 J mol K for a solid solution of NicjoPd o at the magnetic transition. 

Morke W., Lumber R., Schubert U., Breitscheidel B. Metal complexes in inorganic mataials 11 composition of highly dispersed bimetallic Ni Pd alloy particles prepared by sol-gel processing electron microscopy and ferromagnetic resonance study. Chem. Mate. 1994 6 1659-1666... 

Nanocomposites Pd C, Ni C, and NiPd C were produced in Institute of Metal Physics, Ural Branch of the RAS. The piece of Pd, Ni or Ni-Pd alloy was heated by induction levitation melting inside of two oppositely directed turns of inductive coil in closed system filled with hydrocarbon containing inert gas (Ar). Evaporation of strongly overheated ( 2000°C) liquid metal drop was performed in the flow of Ar, containing butane or methane. The metal vapors were taken away by the flow of argon into the colder part of reactor where nucleation and condensation of nanoparticles occurred. This... 

---