Molybdenum complexes 1,1-dithiolate

Add to the sample solution (containing 1 -25 g of Mo) 4 mL of 1 3 sulphuric acid, 3 drops of 85 per cent phosphoric(V) acid, and 0.5 g of citric acid. Dilute with water to 20 mL and add 2 mL of dithiol solution. Allow to stand at room temperature for 2 hours. Extract the molybdenum complex with 13 mL and 10 mL portions respectively of re-distilled butyl acetate, and make up to 25.0 mL with this solvent in a graduated flask filter through glass wool if not entirely clear. Determine the absorbance of the solution at 670 nm. Prepare a calibration curve as detailed in Section 6.14. 

Transition metal complexes of unsaturated 1,2-dithiolates (metal dithiolenes) have attracted much attention because of their interesting structural and redox properties.169 Molybdenum dithiolene complexes have featured prominently170 in these studies and have special significance following the suggestion171,172 that the molybdenum-containing cofactor of the oxomolybdoen-zymes (Section 36.6.7) incorporates a molybdenum complex of an unsymmetrically substituted alkene-1,2-dithiolate. 

Molybdenum is determined by a spectrophotometric procedure involving the reaction of molybdenum with dithiol and evaluation of the carbon tetrachloride complex at 680 nm. 

Table 1 Comparison of first ionization energies for ene-dithiolate and alkoxide molybdenum complexes...

More recendy, molecular molybdenum-sulfur complexes and clusters have been used as soluble precursors for M0S2 in the formulation of lubricating oils for a variety of appHcations (70). Presumably, the oil-soluble molybdenum—sulfur-containing precursors decompose under shear, pressure, or temperature stress at the wear surface to give beneficial coatings. In several cases it has been shown that the soluble precursors are trifunctional in that they not only display antifriction properties, but have antiwear and antioxidant characteristics as weU. In most cases, the ligands for the Mo are of the 1,1-dithiolate type, including dithiocarbamates, dithiophosphates, and xanthates (55,71). 

Toluene-3,4-dithiol, usually called dithioP, yields a slightly soluble, dark-green complex, (CH3.C6H3.S2)3Mo(VI), with molybdenum(VI) in a mineral acid medium, which can be extracted by organic solvents. The resulting green solution is used for the colorimetric determination of molybdenum. 

F.E. Inscore, R. McNaughton, B.L. Westcott, M.E. Helton, R. Jones, I.K. Dhawan, J.H. Enemark, and M.L. Kirk, Spectroscopic evidence for a unique bonding interaction in oxo-molybdenum dithiolate complexes implications for sigma electron transfer pathways in the pyranopterin dithiolate centers of enzymes. Inorg. Chem. 38, 1401-1410 (1999). 

The complex formation of technetium, rhenium, and molybdenum with toluene-3,4-dithiol and its analytical application have been studied by Koyama et al. . 

The second example refers to oxomolybdenum dithiolate complex [Md O(qdt)2], where qdt stands for quinoxaline-2,3-dithiolate. This complex also manifests thermal valence isomerism. Helton et al. (2001) also explain it with the change of the molybdenum oxidation state ... 

Dithiocarbamates, in Ru and Os half-sandwiches, 6, 493 Dithiocarbenes, Pt complexes, 8, 439 Dithiocarboxy ligands, in molybdenum carbonyls, 5, 447 Dithiolate-bridged compounds in dinuclear iron compounds with Fe-Fe bonds, 6, 238 as iron-only hydrogenase biomimetic models, 6, 239 Dithiolate diamides, with Zr(IV), 4, 784 Dithiolene—uranium complexes, synthesis and characterization, 4, 212 Ditopic receptors, characteristics, 12, 489 Ditungsten complexes, associated reactions, 5, 748 Divinyllead diacetates... 

Modified spectrophotometric procedures are described for the quantitative determination of cobalt and molybdenum as the 2-nitrosonaphth-l-olate and toluene-3,4-dithiolate complexes in carbon tetrachloride. The extraction, chelation and phase separation steps permitted rapid sample handling, controlled interferences more effectively and provided accurate assays. The molar absorptivities for cobalt and molybdenum were 5.1 x 104 and 2.5 xl04mol/lcm, respectively, and the detection limits for both elements were 4 ng/g. 

---