Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Molds contact

At the gob feeder, the forming operation begias. The gob feeder deUvers a glass gob shaped such that it enters the blank mold without excessive mold contact, distortion, or reshaping of the glass. Shears cut off a gob of glass. The gob is fed to either a blow and blow, press and blow, or press-only forming operation to produce a container. [Pg.451]

Molding, contact pressure Method of molding or laminating whereby... [Pg.155]

Direct chill casting is the pouring of molten aluminum into a water-cooled mold. Contact cooling water is sprayed onto the aluminum as it is dropped into the mold, and the aluminum ingot falls into a water bath at the end of the casting process. [Pg.222]

The preparation of molded contact lenses using the polymers of the current invention are described by the author [1] in an earlier investigation. [Pg.42]

FIGURE 18.10 (Continued) Thermoelastic effects during directional solidification of a pure material showing (b) perturbation in the metal-mold contact pressure versus time for different , and (c) perturbation of the solidification front for different sensitivities of the contact resistance to the contact pressure [56,57]. [Pg.1415]

Hayakawa R, Arima Y, Hirose O, et al. (1988) Allergic contact dermatitis due to hexamethylenetetramine in core molding. Contact Dermatitis 18 226-228... [Pg.946]

Composite fabrication processes and equipment that incorporate reinforcement impregnation as part of the process, just before the raw material die entry or mold contact... [Pg.1673]

A knockout system is required to eject the part from the mold (see Chapter 7 Mold Design"). On most machines there is an adjustable stationary ejector plate containing ejector bars which go through the movable platen. As the mold closes, the ejector bars go through the holes in the back platen of the mold, contact, and stop the mold knockout plate. The rest of the mold continues to close to a predetermined distance and stops. A superior method to activate the knockout system is by use of hydraulic cylinders. This permits advancing or retracting the knockout system with any speed or force. This can be particularly useful in cam and insert molding. [Pg.266]

Halbmaske half-reaction (electrode potentials) Teilreaktion hammer mill Hammennuhle hand lay-up molding/ contact molding/ impression molding Handauflegeverfahren hand mill Handmiihle hand mold Handwerkzeug,... [Pg.412]

It was found that the temperature recorded by the intrusive thermocouple depended heavily on the set barrel temperature and the temperature of the mold contacting the nozzle. Based on theory we would expect to see the melt temperature readings increase with injection velocity due to the increased viscous dissipation. As seen in Figure 1, the flow channel in the nozzle leading up to the... [Pg.2174]


See other pages where Molds contact is mentioned: [Pg.136]    [Pg.568]    [Pg.135]    [Pg.155]    [Pg.133]    [Pg.477]    [Pg.7]    [Pg.264]    [Pg.371]    [Pg.372]    [Pg.469]    [Pg.1339]    [Pg.3925]    [Pg.226]    [Pg.156]    [Pg.586]    [Pg.91]    [Pg.104]    [Pg.177]    [Pg.601]    [Pg.2420]   


SEARCH



Contact molding

Contact molding

Contact molding cleaning

Hand Lay-Up or Contact Molding

Hand lay-up (contact molding)

Molding pressure contact

Reinforced-plastic contact molding

© 2024 chempedia.info