Mixing head cross section

We have selected a broad cross section of analog and mixed-mode designs, which we have simulated, as well as constructed. The circuits are grouped into logical chapters. Generic topics, such as oscillators, amplifiers/receivers, power converters, and filters, all head their own chapter. Each chapter starts with a brief overview of the function of the circuits in the chapter. This is followed by several circuit examples. For instance, in the chapter on reference circuits, the beginning details what reference circuits are and their uses at the system level. This is followed by a detailed discussion on a single type of reference circuit, the band gap reference. 

Figure 9. Cross section of free pour impingement mixing head in open position.

The polymers, whose characteristics are summarized in Table 1, were melt mixed in a Brabender-like apparatus at 200 C and at two residence times 6 min, at 2 r.p.m. and further 10 min. at 32 r.p.m. The blend compositions are listed in Table 2. After premixing, cylindrical specimens were obtained directly by extrusion using a melting-elastic miniextruder (CSI max mixing extruder mod. CS-194), Thermal and tensile mechanical tests were performed on these specimens by an Instron Machine (mod. 1122) at room temperature and at cross-head speed of 10 mm/min. Also made were morphological studies by optical microscopy of sections microtomed from tensile samples and scanning electron microscopy of fractured surfaces of samples broken at liquid nitrogen temperature. Further details on the experimental procedures and on the techniques used are reported elsewhere . 

---