Microfilters as Supports

Efforts to overcome the limitations of the fragile membranes (as delicate as soap bubbles) have evolved with the use of membrane supports, such as polycarbonate filters (straight-through pores) [543] or other more porous microfilters (sponge-like pore structure) [545-548]. 

Cools and Janssen [545] studied the effect of background salt on the permeability of warfarin through octanol-impregnated membranes (Millipore ultrafiltration filters, VSWP, 0.025-pm pores). At a pH where warfarin was in its ionized form, it was found that increasing background salt increased permeability (Fig. 7.7). This 

4 Octanol-lmpregnated Filters with Controlled Water Pores 

Ghosh [548] used cellulose nitrate microporous filters (500 pm thick) as scaffold material to deposit octanol into the pores and then under controlled pressure conditions, displace some of the oil in the pores with water, creating a membrane with parallel oil and water pathways. This was thought to serve as a possible model for some of the properties of the outermost layer of skin, the stratum comeum. The relative proportions of the two types of channel could be controlled, and the properties of 5-10% water pore content were studied. Ibuprofen (lipophilic) and antipyr-ine (hydrophilic) were model drugs used. When the filter was filled entirely with water, the measured permeability of antipyrine was 69 (in 10 6 cm/s) when 90% of the pores were filled with octanol, the permeability decreased to 33 95% octanol content further decreased permeability to 23, and fully octanol-filled filters indicated 0.9 as the permeability. 

---