Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Methylene-bis-o-chloroaniline

Curalon [Uniroyal]. TM for a series of urethane curatives. Curalon L, a mixture of hindered aromatic primary diamines. Curalon M, p,p methylene-bis(o-chloroaniline). [Pg.352]

A significant effort has been carried out in recent years on chain extenders for urethane elastomers. This has been prompted primarily by the search for a suitable replacement for 4,4 -methylene bis(o-chloroaniline) (MOCA), a widely used chain extender and curing agent which gives a positive Ames test (screening test for mutagenicity). [Pg.533]

Prepolymers of polybutadiene diol (M. 2500), polytetramethylene oxide diol (M. 1400 and M. 2100), and prepolymer of polypropylene oxide diol (M. 1400) were used to obtain segmented elastomers SPU-1 to SPU-5. Prepolymers were prepared by reaction of appropriate diol with 2,4-toluene diisocyanate (2 moles per one mole of diol). Prepolymers of polytetramethylene oxide diol (elastomers SPU-1 and SPU-4) were cured by methylene-bis-o-chloroaniline, MOCA, or by mixture of MOCA and polytetramethylene oxide diol (SPU-2 and SPU-3). SPU-5 samples, prepared from prepolymer of polypropylene oxide diol, were cured by MOCA, and prepolymer of polybutadiene diol was cured by a mixture of MOCA and polytetramethylene oxide diol (SPU-6). Various concentrations of hard segments, Cj, in SPU were set by a ratio of mixture components and molecular weight of prepolymer (Table 10.14). Excess of NCO-groups was in the range 1.03-1.06 for SPU-1 to SPU-5 and 0.99 for SPU-6. All samples were cured at 80°C for 4 days. The... [Pg.251]

EFFECT OF MOLECULAR WEIGHT AND POLYOL TYPE ON THE PROPERTIES OF POLYURETHANE ELASTOMERS USING DIPHENYLMETHANE DIISOCYANATE AND METHYLENE BIS(O-CHLOROANILINE)... [Pg.421]

The 2003 ACGIH threshold limit valuetime-weighted average (TLV-TWA) for 4,4 -methylene bis(2-chloroaniline) is 0.01 ppm (O.llmg/m ) with an A2-suspected human carcinogen designation and a notation for skin absorption. [Pg.468]

Linch AL, O Conner GB, Barnes JR, et al Methylene-bis-orfl5o-chloroaniline (MOCA) Evaluation of hazards and exposure control. Am Ind Hyg Assoc J 32 802-819, 1971... [Pg.469]

SYNS BIS AMINE CURALIN M CURENE 442 CYANASET DI(-4-AMINO-3-CHLOROPHENYL)METH-ANE DI-(4-AMINO-3-CLOROFENIL)METANO (ITALIAN) 4,4 -DIAMINO-3,3 -DICHLORODIPHENYL-METHANE 3,3 -DICHLOR-4,4 -DIAMINODIPHENYL-METHAN (GERMAN) 3,3 -DICHLORO-4,4 -DIAMINODIPHENYLMETHANE 3,3 -DICLORO-4,4 -DIAMINODIFENILMETANO (ITALIAN) MBOCA METHYLENE-4,4 -BIS(o-CHLOROANILINE) p,p -METHYLENEBIS(a-CHLOROANTLINE) p,p -METHYL-ENEBIS(o-CHLOROANILINE) 4,4 -METHYLENE(BIS)-CHLOROANILINE 4,4 -METHYLENEBIS(o-CHLORO-ANILINE) 4,4 -METHYLENEBIS-2-CHLOROBENZ-ENAMINE METHYLENE-BIS-ORTHOCHLOROANIL-... [Pg.917]

Difluoroaniline 4,4 -Methylene bis(2-chloroaniline) 4,4 -Methylenedianiline 4,4 -Oxi dianiline p-Phenylenediamine w-Toluidine o-Toluidine w-Xylenediamine Amines, Aromatic, Secondary and Tertiary... [Pg.145]


See other pages where Methylene-bis-o-chloroaniline is mentioned: [Pg.121]    [Pg.126]    [Pg.331]    [Pg.331]    [Pg.67]    [Pg.197]    [Pg.197]    [Pg.198]    [Pg.1440]    [Pg.26]    [Pg.121]    [Pg.126]    [Pg.331]    [Pg.331]    [Pg.67]    [Pg.197]    [Pg.197]    [Pg.198]    [Pg.1440]    [Pg.26]    [Pg.1772]    [Pg.405]    [Pg.236]   
See also in sourсe #XX -- [ Pg.197 , Pg.198 ]




SEARCH



2,4-Bis-[methylen

4,4-methylene-bis-2-chloroaniline

Chloroanilines

O-Chloroaniline

© 2024 chempedia.info