Methacryloxy propyltrimethoxysilane

Methacrylic acid, 3-(trimethoxysilyl) propyl ester. See 3-Methacryloxy-propyltrimethoxysilane Methacrylic amide. See Methacrylamide... 

The first step was to clean the capillary by flushing it with 1M NaOH for 30 min followed by water for 30 min. The capillary was then derivatized by filling it with a mixture of 4-pL of methacryloxy propyltrimethoxysilane in ImL of 6mM acetic acid and the solution was kept in the capillary for at least 1 h. Then the capillary was rinsed with water and dried with nitrogen. 

Figure 5 Illustration of the preparation procedure for capillary columns with molecularly imprinted polymer monolith. (1) Polymerization mixture is prepared and plastic tubing is placed on both ends of a capillary derivatized with methacryloxy propyltrimethoxysilane. (2) The capillary is filled with the mixture using a syringe. (3) The capillary is sealed by placing clips on the plastic tubings. The polymerization is performed under an UV source (350 nm) at —20°C for 80 min. (4) The polymerization reaction is interrupted by flushing remaining monomer, radical initiator, and imprint molecule out of the capillary. (5) The capillary column is then ready for CEC. (Reproduced with permission from Ref. 38.)...

Coupling agent y-Methacryloxy-propyltrimethoxysilane y-Ethylenediaminepropyltrimethoxysi-lane or methacrylic acid complex of chromic chloride y-Aminopropyltriethoxysilane... 

Efficient adhesion additives are silanes and siloxanes with a content in vinyl, aminoalkyl, and ethoxy groups [90]. A wide application as additives is known for the p-glycidoxypropylbicyclo-2,2,1-heptane, vinyltriethoxysilane, methacryloxy-propyltrimethoxysilane, and y-mercaptopropyltrimethoxysilane [91,92]. 

Methacrylylsilane 3-methacryloxy-propyltrimethoxysilane (MEMO) Sioplas process... 

---