Mass transfer modeling reverse osmosis

Most theoretical studies of osmosis and reverse osmosis have been carried out using macroscopic continuum hydrodynamics [5,8-13]. The models used include those that treat the wall as either nonporous or porous. In the nonporous models the membrane surface is assumed homogeneous and nonporous. Transport occurs by the molecules dissolving in the membrane phase and then diffusing through the membrane. Mass transfer across the membrane in these models is usually described using the solution-diffusion... 

This can be further integrated from the wall to the boundary layer thickness y = 8, where the component is at the bulk concentration Cj,. Substituting / = - o and k = D/o, the mass-transfer coefficient yields the stagnant film model [Brian, Desalination by Reverse Osmosis, Merten (ed.), M.I.T. Press, Cambridge, Mass., 1966, pp. 161-292] ... 

It is required to design a reverse osmosis unit to process 2500 mVh of seawater at 25°C containing 3.5 wt% dissolved salts, and produce purified water with 0.05 wt% dissolved salts. The pressure will be maintained at 135 atm on the residue side and 3.5 atm on the permeate side, and the temperature on both sides at 25°C. The dissolved salts may be assumed to be NaCl. With the proposed membrane, the salt permeance is 8.0 x 10 m/h and the water permeance is 0.085 kg/rn-.h.atrn. The density of the feed seawater is 1020 kg/m ( of the permeate, 997.5 kg/nv and of the residue (with an estimated salt content of 5 wt%), 1035 kg/rnc Assuming a perfect mixing model and neglecting the mass transfer resistances, determine the required membrane area and calculate the product flow rates and compositions. 

---